Blick ins Buch

Plate Stability by Boundary Element Method

Abbas Elzein (Autor)

Buch | Softcover

VII, 205 Seiten

1991 | 1. Softcover reprint of the original 1st ed. 1991
Springer Berlin (Verlag)
978-3-540-53710-6 (ISBN)

Lese- und Medienproben

Inhaltsverzeichnis (PDF)

Artikel merken

1. 1 Historical Background Thin plates and shells are widely used structural elements in numerous civil, mechanical, aeronautical and marine engineering design applications. Floor slabs, bridge decks, concrete pavements, sheet pile retaining walls are all, under normal lateral loading circumstances, instances of plate bending in civil engineering. The problem of elastic instability of plates occurs when load is applied in a direction parallel to the plane of the plate. The deck of a bridge subjected to a strong wind loading, the web of a girder under the action of shear forces transmitted by the flanges, the turbine blade of a machinery undergoing longitudinal temperature differentials, would all eventually buckle when the applied load, or its temperature equivalent in the last case, exceeds a certain limit, that is the buckling load. Although the plate may exhibit a considerable post-buckling strength, the buckling load is considered in many design instances, especially in aeronautical and marine engineering, as a serviceability limit because of the abrupt and substantial change in the dimensions and shape of the buckled plate. Nevertheless, the post-buckling region retains its importance either as an essential safety margin or as a stage of loading actually reached under normal loading conditions. The design engineer will therefore need rigorous tools of analysis to predict, in addition to the buckling load, the deflections and stresses at both buckling and initial post-buckling stages.

1 Introduction.- 1.1 Historical Background.- 1.2 Stability.- 1.3 Experimental and Numerical Modelling.- 1.4 The Boundary Element Method.- 1.5 Plate Stability by BEM.- 1.6 Scope of the Present Work.- 2 Plate Stability Theory.- 2.1 Introduction.- 2.2 Stability of Structural Systems.- 2.3 Linear Theory.- 2.4 Large Deflections.- 2.5 Boundary Conditions.- 2.6 Numerical and Experimental Studies.- 2.7 Conclusions.- 3 Membrane State of Stress.- 3.1 Introduction.- 3.2 Boundary Integral Formulation.- 3.3 Boundary Element Solution.- 3.4 Numerical Implementation.- 3.5 Results.- 3.6 Conclusions.- 4 Critical Loads.- 4.1 Introduction.- 4.2 Boundary Integral Formulation.- 4.3 Boundary Element Solution.- 4.4 Numerical Implementation.- 4.5 Results.- 4.6 Conclusions.- 5 Dual Reciprocity.- 5.1 Introduction.- 5.2 Outline of the Method.- 5.3 The Discrete Points Fourier Analysis.- 5.4 The Deflection Models.- 5.5 Transformation of L(w).- 5.6 Transformation of the Domain Integral.- 5.7 The Problem of Singular Integrals.- 5.8 Eigenvalue Problem.- 5.9 Numerical Implementation.- 5.10 Results.- 5.11 Conclusions.- 6 Large Deflections.- 6.1 Introduction.- 6.2 Boundary Integral Formulation.- 6.3 Domain Deflection Models.- 6.4 Boundary Element Solution.- 6.5 Solution of the System of Equations.- 6.6 Numerical Implementation.- 6.7 Results.- 6.8 Conclusions.- 7 Conclusions.- Appendix A The Green's Identities.- Appendix B Functions of the Fundamental Solutions.- Appendix C Trigonometric Deflection Functions.- References.

Erscheint lt. Verlag	13.5.1991
Reihe/Serie	Lecture Notes in Engineering
Zusatzinfo	VII, 205 p.
Verlagsort	Berlin
Sprache	englisch
Maße	170 x 242 mm
Gewicht	384 g
Themenwelt	Mathematik / Informatik ► Mathematik ► Wahrscheinlichkeit / Kombinatorik
	Naturwissenschaften ► Physik / Astronomie ► Mechanik
	Technik ► Bauwesen
	Technik ► Maschinenbau
Schlagworte	Boundary element method • Calculus • Doppelreziprokes Randelement • Dual Reciprocity Boundary Element • Fourierreihe • Fourier series • Model • Modeling • Plate Stability • Platte • Plattenstabilität • Plattentektonik • Randelementmethode • Randelementmethode / Boundary-Elemente • Transformation
ISBN-10	3-540-53710-4 / 3540537104
ISBN-13	978-3-540-53710-6 / 9783540537106
Zustand	Neuware