Nicht aus der Schweiz? Besuchen Sie lehmanns.de
The Designer's Guide to the Cortex-M Processor Family - Trevor Martin

The Designer's Guide to the Cortex-M Processor Family

(Autor)

Buch | Softcover
490 Seiten
2016 | 2nd edition
Newnes (an imprint of Butterworth-Heinemann Ltd ) (Verlag)
978-0-08-100629-0 (ISBN)
CHF 83,75 inkl. MwSt
zur Neuauflage
  • Titel erscheint in neuer Auflage
  • Artikel merken
Zu diesem Artikel existiert eine Nachauflage
The Designer’s Guide to the Cortex-M Microcontrollers gives you an easy-to-understand introduction to the concepts required to develop programs in C with a Cortex-M based microcontroller. The book begins with an overview of the Cortex-M family, giving architectural descriptions supported with practical examples, enabling you to easily develop basic C programs to run on the Cortex-M0/M0+/M3 and M4 and M7. It then examines the more advanced features of the Cortex architecture such as memory protection, operating modes, and dual stack operation.

Once a firm grounding in the Cortex-M processor has been established the book introduces the use of a small footprint RTOS and the CMSIS-DSP library. The book also examines techniques for software testing and code reuse specific to Cortex-M microcontrollers. With this book you will learn: the key differences between the Cortex-M0/M0+/M3 and M4 and M7; how to write C programs to run on Cortex-M based processors; how to make the best use of the CoreSight debug system; the Cortex-M operating modes and memory protection; advanced software techniques that can be used on Cortex-M microcontrollers; how to use a Real Time Operating System with Cortex-M devices; how to optimize DSP code for the Cortex-M4; and how to build real time DSP systems.

Trevor Martin graduated from Brunel University in 1988 with an Honors degree in electrical and electronics engineering. In the same year, he began work as a junior hardware engineer at Philips Medical Systems. He joined Hitex in 1992 as a technical specialist for 8-bit microcontroller development tools. This included the 8051,68HC11/05/08 microcontrollers. He also gained experience with networking protocols such as CAN, USB, and TCP/IP. Since 2000, he has been supporting ARM-based microcontrollers, initially ARM7 and ARM9 CPU then moving to Cortex-M processor. To promote these devices, he has worked closely with both NXP and ST and also TI and Freescale to a lesser extent. Since 2005, he has written a number of “Insider’s Guide” books that are introductory tutorials to ARM-based microcontroller families such as LPC2000, STR9, and STM32. He also runs regular training courses, a general Cortex Microcontroller workshop and also device-specific courses.

1. Introduction to the Cortex-M processor family 2. Developing software for the Cortex-M family 3. Cortex-M Architecture 4. Cortex Microcontroller Software Interface Standard 5. Advanced Architectural features 6. Cortex-M7 Architecture 7. Debugging with CoreSight 8. Practical DSP for the Cortex-M4 9. Developing with CMSIS-RTOS 10. Practical RTOS Techniques 11. Test Driven Development 12. Designing Software Components 13. Closing Thoughts

Erscheinungsdatum
Verlagsort Oxford
Sprache englisch
Maße 191 x 235 mm
Gewicht 660 g
Themenwelt Mathematik / Informatik Informatik Programmiersprachen / -werkzeuge
Technik Elektrotechnik / Energietechnik
ISBN-10 0-08-100629-2 / 0081006292
ISBN-13 978-0-08-100629-0 / 9780081006290
Zustand Neuware
Informationen gemäß Produktsicherheitsverordnung (GPSR)
Haben Sie eine Frage zum Produkt?
Mehr entdecken
aus dem Bereich
Das Handbuch für Webentwickler

von Philip Ackermann

Buch | Hardcover (2023)
Rheinwerk (Verlag)
CHF 69,85
Der Einstieg ins Informatikstudium

von Heinrich Müller; Frank Weichert

Buch | Softcover (2023)
Springer Vieweg (Verlag)
CHF 48,95
Grundlagen und praktische Anwendungen von Transpondern, kontaktlosen …

von Klaus Finkenzeller

Buch (2023)
Hanser (Verlag)
CHF 125,95