Nicht aus der Schweiz? Besuchen Sie lehmanns.de
Für diesen Artikel ist leider kein Bild verfügbar.

The Designer's Guide to the Cortex-M Processor Family

A Tutorial Approach

(Autor)

Buch | Softcover
336 Seiten
2013
Newnes (an imprint of Butterworth-Heinemann Ltd ) (Verlag)
978-0-08-098296-0 (ISBN)
CHF 72,45 inkl. MwSt
zur Neuauflage
  • Titel erscheint in neuer Auflage
  • Artikel merken
Zu diesem Artikel existiert eine Nachauflage
Gives the key concepts required to develop programs in C with a Cortex M- based processor. This book begins with an overview of the Cortex-M family, giving architectural descriptions supported with practical examples, enabling the engineer to easily develop basic C programs to run on the Cortex- M0/M0+/M3 and M4.
The Designer’s Guide to the Cortex-M Family is a tutorial-based book giving the key concepts required to develop programs in C with a Cortex M- based processor. The book begins with an overview of the Cortex- M family, giving architectural descriptions supported with practical examples, enabling the engineer to easily develop basic C programs to run on the Cortex- M0/M0+/M3 and M4. It then examines the more advanced features of the Cortex architecture such as memory protection, operating modes and dual stack operation. Once a firm grounding in the Cortex M processor has been established the book introduces the use of a small footprint RTOS and the CMSIS DSP library.

With this book you will learn:



The key differences between the Cortex M0/M0+/M3 and M4
How to write C programs to run on Cortex-M based processors
How to make best use of the Coresight debug system
How to do RTOS development
The Cortex-M operating modes and memory protection
Advanced software techniques that can be used on Cortex-M microcontrollers
How to optimise DSP code for the cortex M4 and how to build real time DSP systems

Trevor Martin graduated from Brunel University in 1988 with an Honors degree in electrical and electronics engineering. In the same year, he began work as a junior hardware engineer at Philips Medical Systems. He joined Hitex in 1992 as a technical specialist for 8-bit microcontroller development tools. This included the 8051,68HC11/05/08 microcontrollers. He also gained experience with networking protocols such as CAN, USB, and TCP/IP. Since 2000, he has been supporting ARM-based microcontrollers, initially ARM7 and ARM9 CPU then moving to Cortex-M processor. To promote these devices, he has worked closely with both NXP and ST and also TI and Freescale to a lesser extent. Since 2005, he has written a number of “Insider’s Guide” books that are introductory tutorials to ARM-based microcontroller families such as LPC2000, STR9, and STM32. He also runs regular training courses, a general Cortex Microcontroller workshop and also device-specific courses.

Introduction to ARM Cortex Processors

Developing with Cortex M Processors

Cortex-M Architecture

Debugging with CoreSight

Cortex Microcontroller Interface Standard

Advanced Architecture Features

Developing with an RTOS

Practical DSP for Cortex-M4

Future Trends

Verlagsort Oxford
Sprache englisch
Maße 191 x 235 mm
Gewicht 620 g
Themenwelt Informatik Weitere Themen Hardware
Technik Elektrotechnik / Energietechnik
ISBN-10 0-08-098296-4 / 0080982964
ISBN-13 978-0-08-098296-0 / 9780080982960
Zustand Neuware
Informationen gemäß Produktsicherheitsverordnung (GPSR)
Haben Sie eine Frage zum Produkt?
Mehr entdecken
aus dem Bereich
entwickle, drucke und baue deine DIY-Objekte

von Stephan Regele

Buch | Hardcover (2023)
Hanser, Carl (Verlag)
CHF 48,95