Green Manufacturing and Materials Processing Methods
CRC Press (Verlag)
978-1-032-58017-3 (ISBN)
In this modern technological era, conserving and making better use of resources like energy, water, and other essential resources have recently been one of the main concerns for the manufacturing industry. To successfully compete against the competition, industries are replacing outdated manufacturing techniques with cutting-edge ones that are sustainable in terms of cost, energy usage, better product quality, and environmental safety. Green manufacturing has become one of the key priorities for attaining this.
Green Manufacturing and Materials Processing Methods: Characterizations, Applications, and Design offers a critical review of the past work done in green manufacturing and material processing technologies. It presents recent research and development that is going on currently with green manufacturing techniques and discusses characterizations, applications, and the design aspect of materials processed through green manufacturing technologies. With a focus on the sustainability aspect, this book showcases new breakthroughs and comparisons of cutting-edge sustainable manufacturing and materials processing with currently available conventional methods. Highlights throughout the book are on improvements used in various manufacturing processes such as casting, joining, drilling, surface engineering, sintering, and composite manufacturing.
This book will serve as a first-hand information source for academic researchers and industrial firms. With the help of this book, readers will have a unique opportunity to comprehend and evaluate recent advancements in green manufacturing and material processing technology. This book will be the go-to resource for individuals who desire to do research or development in the area of sustainable manufacturing and material processing technologies.
Sarbjeet Kaushal is currently working as a professor in the Department of Mechanical Engineering at Gulzar Group of Institutions, Khanna, Ludhiana, Punjab, India. He received his Ph.D. in Mechanical Engineering from Thapar Institute of Engineering and Technology, Patiala, India. His research interests include sustainable manufacturing, surface engineering, microwave processing of materials, tribology of composite materials, and advanced manufacturing processes. He has published more than 50 papers in referred journals including 26 SCI/ SCIE indexed journals. He has organized several seminars, workshops, and conferences at national and international level. He has also published two books. He is the reviewer of several peer-reviewed journals such as Vacuum (Elsevier), International Journal of Metal Castings (Springer), and Journal of Engineering Manufacture (SAGE). Sandeep Bansal is working as Assistant Professor in the Department of Mechanical Engineering at Shree Guru Gobind Singh Tricentenary University, Gurgaon, India. He obtained his Diploma in Mechanical Engineering from S.L.I.E.T, Longowal, Sangrur, India; B.Tech. in Mechanical Engineering from the Institution of Engineers India; Master’s in Mechanical Engineering from Bhai Gurdas Institute of Engineering and Technology, Sangrur, India; and Doctoral Degree from Thapar Institute of Engineering and Technology, Patiala, India. He has more than 18 years of teaching and industrial experience. He has published more than 15 articles in journals and conferences. He worked on a DST (SERB)- funded research project during his Ph.D. His areas of interest are microwave material processing, surface engineering, tribology, and biomedical. Chander Prakash is Pro- Vice Chancellor of Research & Development at Chandigarh University, Punjab, India. He has published over 400 (330 SCI/ Scopus) scientific articles in peer- reviewed, reputable, top- notch journals, conferences, and books. Prakash is a highly cited researcher at the international level, and he has 8874 citations, an H- index of 53, and an i10 index of 182. He is among India’s Top 1% of leading Mechanical and Aerospace Engineering scientists, Research.com. He holds 38 ranks in India. He has edited 23 books and 3 authored books for various reputed publishers like Springer, Elsevier, CRC Press, and World Scientific. He is a series editor of the book Sustainable Manufacturing Technologies: Additive, Subtractive, and Hybrid, CRC Press, Taylor & Francis, where more than 25 edited books were published by national and international researchers. He is serving as an editorial board member of peer- reviewed international journals Cogent Engineering and Frontiers in Manufacturing Technology. He is serving as a guest editor for peer- reviewed SCIindexed journals. Bhupinder Singh is currently working as a Research Fellow in the Department of Chemical and Environmental Engineering, University of Nottingham, UK. He obtained his Ph.D from IIT Mandi, India; and Master’s degree from Thapar Institute of Engineering and Technology, India. His areas of interest include surface engineering, cavitation erosion, and advanced manufacturing. He possesses a track record of designing successful experimental programs, including numerous research papers in reputed journals and a patent. Dheeraj Gupta is currently Professor and Head of the Central Workshop at the Thapar Institute of Engineering and Technology, Patiala, India. He obtained his B.E. in Mechanical Engineering from Shri Govindram Seksaria Institute of Technology and Science, Indore, India; and Master’s and Doctoral degrees from Indian Institute of Technology Roorkee, India. He has more than 10 years of teaching and research experience. He has worked on a European Union funded project in Lisbon, Portugal. He has published more than 70 articles in journals and conferences. He has filed two Indian patents on microwave processing of metals. Currently, he is a principal investigator for an Indian government- funded project. His areas of interest are microwave material processing, surface engineering, tribology, biomedical, and advanced manufacturing. He has supervised many Master’s thesis and six Ph.D thesis.
1. Introduction to Green Manufacturing Techniques. 2. Microwave processing of Materials: A Sustainable Manufacturing Approach. 3. Microwave Cladding for Enhanced Tribological Performance. 4. Microwave-Processed Casting: A Green Manufacturing Approach. 5. An Introduction of Green Energy-Based Welding Process. 6. Green Approach for Synthesis of Nanomaterials. 7. Exploring the Components of Green Building Envelopes for Sustainable Civil Infrastructure - A Critical Review. 8. Examining barriers for implementation of green manufacturing in Indian MSMEs by means of AHP technique. 9. Green Manufacturing Implementation in Industries: Case Studies.
| Erscheinungsdatum | 23.08.2024 |
|---|---|
| Reihe/Serie | Sustainable Manufacturing Technologies |
| Zusatzinfo | 16 Tables, black and white; 33 Line drawings, black and white; 7 Halftones, black and white; 40 Illustrations, black and white |
| Verlagsort | London |
| Sprache | englisch |
| Maße | 156 x 234 mm |
| Gewicht | 508 g |
| Themenwelt | Technik ► Bauwesen |
| Technik ► Umwelttechnik / Biotechnologie | |
| Wirtschaft ► Betriebswirtschaft / Management ► Logistik / Produktion | |
| ISBN-10 | 1-032-58017-8 / 1032580178 |
| ISBN-13 | 978-1-032-58017-3 / 9781032580173 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
