Handbook of Thermal Management Systems
Elsevier - Health Sciences Division (Verlag)
978-0-443-19017-9 (ISBN)
Dedicated chapters then systematically examine the heating, cooling, and phase changes of each system, supported by numerical analyses, simulations and experimental data. These chapters include discussion of the latest technologies and methods and practical guidance on their application in real-world system-level projects, as well as case studies from engineering systems that are currently in operation. Finally, next-generation technologies and methods are discussed and considered.
INSA Hauts-de-France, LAMIH UMR CNRS 8201, Université Polytechnique Hauts-de-France, Campus Mont-Houy, F-59313 Valenciennes Cedex 9, France. Prof. Fethi ALOUI has published around 100 journal papers, more than 135 conference papers (53 with DOI), 6 published books (ISBN and DOI), 2 published conference proceedings (ISBN) and 26 book chapters (with DOI). He was the organizer of 3 international conferences and the co-organizer of many other international conferences and symposia, among them (and in each year since 2010 until 2017) the ASME-FEDSM “Symposium on Transport Phenomena in Energy Conversion from Clean and Sustainable Resources. He is the Associate Editor of the “Journal of Applied Fluid Mechanics since 2008 and was the Associate Editor of “International Journal of Energy Research from 2013 until 2022. Prof. Edwin Geo Varuvel has published papers in 70 international journals, 16 international conferences and 16 national conferences. He has eight years of research and 18 years of teaching experience in engineering level. He worked for Ecole des Mines de Nantes, France for about two years as a research engineer in the field of waste biofuels. He is a reviewer for more than 20 international journals. He has handled more than ten research projects in the field of alternate fuels for automobiles. He was awarded with €18,000 by AICTE India to develop an electronically controlled high performance RSO-hydrogen dual fuel engine. Currently, he is working on two sponsored research projects on system identification of Biodiesel-hydrogen dual fuel engine and liquid fuel production from waste oils under selective excellence. Dr. Ankit Sonthalia is currently working as an Assistant Professor in the Department of Automobile Engineering, SRM Institute of Science and Technology. He has published more than 20 papers in international journals. He is reviewer of six international journals. He is a member of Society of Automobile Engineer. His research interests include waste to energy, thermal management, emission control and hydrogen.
1. Basics of Heat Transfer: Conduction 2. Basics of Heat Transfer: Convection 3. Basics of Heat Transfer: Heat Exchanger 4. Introduction to battery systems 5. Redox Flow Batteries membranes: overview and advances 6. Need of Battery Thermal Management System 7. Battery thermal modelling: models and prospects 8. Battery Thermal Modelling and Effective Cooling.heating Methods 9. Evaluation of heat generation and application in liquid cooling of Li-ion battery packs 10. Battery Thermal Management Through Simulation and Experiment: Air Cooling and Enhancement 11. Battery thermal management through simulation and experiment (liquid cooling.heating) 12. Simulations of 3D Inhomogeneous Temperature Distributions in Li-Ion Pouch Cells with Passive Thermal Management 13. A Novel Cooling Strategy for Lithium-Ion Battery Thermal Management with Phase Change Material 14. Passive Thermal Management Systems for e-mobility using PCM composites 15. Comparison of Air, Liquid and Phase Change Material for Battery Thermal Management 16. Fuel Cells Basics and Types 17. Fuel Cell Technology – Overview and Aspects of System Integration Science 18. Recent advancements and prospects of thermal management strategies in polymer electrolyte membrane Fuel cells (PEMFC) 19. Thermal stress modelling of solid oxide fuel cell stacks based on multi-physics numerical method 20. Thermal modelling and performance assessment of a PEM fuel cell 21. Air cooled fuel cells: simulation and experiments 22. Water cooled fuel cell: simulation and experiments 23. Liquid-cooling PEM fuel cell thermal management: Fundamental configuration, numerical simulation, control algorithm and experimental verification 24. Futuristic methods of fuel cell cooling 25. Introduction to Solar Panels 26. Cooling technologies for efficiency enhancement of solar PV panels: A review 27. Enhancing the Efficiency of Solar Photovoltaic Systems by Using Liquid cooling Techniques 28.Liquid-based solar panel cooling and PV.T systems 29. Improvement of solar panel performance using phase change material 30. Thermal management of PV Panels for Enhanced performance using PCM 31. Solar panel cooling using hybrid cooling systems 32. Hybrid cooling systems for enhancing the electrical performance of solar photovoltaic (PV) panels 33. The effect of thermal treatments on photovoltaic module Recycling 34. Review of Phase change materials 35. Strategies for Thermal management of electronics: Design, Development, and Application 36. Futuristic methods of electronics cooling 37. Experimental and Numerical Study of PCM Based Heat Sink for Thermal Management Electronic Chips 38. Mechanism of flow boiling in microchannels and structure optimization of heat changers used in pumped two-phase cooling system for data center cooling 39. Waste-heat driven Stirling engine systems: Conception and Parameters 40. Thermal and catalytic pyrolysis of date palm stones: Production, characterization of pyrolytic oil and study of performance and emission characteristics in CI engine 41. Experimental Investigation of Performance and Exhaust Emissions of Pyrolytic Olive Pomaces biofuels blends without and with additives fuelled Internal Combustion Engine 42. Experimental and multi-scale numerical study of air-flue gas heat exchanger in a biomass boiler
| Erscheinungsdatum | 03.08.2023 |
|---|---|
| Verlagsort | Philadelphia |
| Sprache | englisch |
| Maße | 216 x 276 mm |
| Gewicht | 2290 g |
| Themenwelt | Naturwissenschaften ► Biologie ► Ökologie / Naturschutz |
| Technik ► Elektrotechnik / Energietechnik | |
| Technik ► Maschinenbau | |
| Wirtschaft ► Volkswirtschaftslehre | |
| ISBN-10 | 0-443-19017-8 / 0443190178 |
| ISBN-13 | 978-0-443-19017-9 / 9780443190179 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
