Additive Manufacturing Process for the Production of Glass Fibre Bushings
Seiten
Glass fibres play a key role in technologies of great commercial importance such as multilayer printed circuit boards (PCBs), composite wind turbine blades, and lightweight boats. Glass fibre bushings made of PtRh alloys form a critical part of the glass fibre production process. Both in terms of design and quality, traditional manufacturing methods such as milling, drilling, and welding limit the potential of such bushings. It is the goal of this work to evaluate a novel manufacturing method for the production of glass fibre bushings, namely additive manufacturing (AM), to provide a means to overcome current deficits in bushing design and manufacturing. To date, the use of additively manufactured bushings for the production of glass fibres has not yet been investigated systematically.
In this work, a three-step approach for the investigation of the key research questions is applied. In the first step, the technical feasibility of the use of additively manufactured bushings is evaluated. Secondly, the design freedoms of the additive manufacturing technology are explored in a design exploitation study concerning a key deficit in the state of the art: tip packing density. In a final step, the economic feasibility of the additive manufacturing process for bushings is evaluated through a cost calculation based on full cost accounting principles
In this work, a three-step approach for the investigation of the key research questions is applied. In the first step, the technical feasibility of the use of additively manufactured bushings is evaluated. Secondly, the design freedoms of the additive manufacturing technology are explored in a design exploitation study concerning a key deficit in the state of the art: tip packing density. In a final step, the economic feasibility of the additive manufacturing process for bushings is evaluated through a cost calculation based on full cost accounting principles
| Erscheinungsdatum | 29.03.2022 |
|---|---|
| Reihe/Serie | Textiltechnik/ Textile Technology |
| Verlagsort | Düren |
| Sprache | englisch |
| Maße | 148 x 210 mm |
| Gewicht | 273 g |
| Themenwelt | Sachbuch/Ratgeber ► Natur / Technik ► Technik |
| Technik | |
| Schlagworte | 3D Printing • Additive Manufacturing • Bushing • glass fibre |
| ISBN-10 | 3-8440-8532-7 / 3844085327 |
| ISBN-13 | 978-3-8440-8532-7 / 9783844085327 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
Mehr entdecken
aus dem Bereich
aus dem Bereich
die wichtigsten Begriffe, Bautypen und Bauelemente
Buch | Softcover (2024)
Prestel (Verlag)
CHF 44,75
vom Kolosseum über die Akropolis bis zur Alhambra
Buch | Hardcover (2023)
DK (Verlag)
CHF 29,90
Buch | Hardcover (2021)
C. Bertelsmann (Verlag)
CHF 25,20
