Structural Concrete
John Wiley & Sons Inc (Verlag)
978-1-119-60511-9 (ISBN)
A go-to resource for structural engineering students and professionals for over twenty years, this newly updated text on concrete structural design and analysis reflects the most recent ACI 318-19 code. It emphasizes student comprehension by presenting design methods alongside relevant codes and standards. It also offers numerous examples (presented using SI units and US-SI conversion factors) and practice problems to guide students through the analysis and design of each type of structural member.
New to Structural Concrete: Theory and Design, Seventh Edition are code provisions for transverse reinforcement and shear in wide beams, hanger reinforcement, and bi-directional interaction of one-way shear. This edition also includes the latest information on two-way shear strength, ordinary walls, seismic loads, reinforcement detailing and analysis, and materials requirements. This book covers the historical background of structural concrete; advantages and disadvantages; codes and practice; and design philosophy and concepts. It then launches into a discussion of the properties of reinforced concrete, and continues with chapters on flexural analysis and design; deflection and control of cracking; development length of reinforcing bars; designing with the strut-and-tie method; one-way slabs; axially loaded columns; and more.
Updated to align with the new ACI 318-19 code with new code provisions to include: transverse reinforcement and shear in wide beams, hanger reinforcement, bi-directional interaction of one-way shear, and reference to ACI certifications
Includes dozens of worked examples that explain the analysis and design of structural members
Offers updated information on two-way shear strength, seismic loads, materials requirements, and more
Improves the design ability of students by explaining code requirements and restrictions
Provides examples in SI units in every chapter as well as conversion factors from customary units to SI
Offers instructors access to a solutions manual via the book's companion website
Structural Concrete: Theory and Design, Seventh Edition is an excellent text for undergraduate and graduate students in civil and structural engineering programs. It will also benefit concrete designers, structural engineers, and civil engineers focused on structures.
M. Nadim Hassoun, PhD, PE, FASCE, FICE, MACI, is Professor Emeritus of Civil Engineering at South Dakota State University. Akthem Al-Manaseer, PhD, PEng, CEng, FASCE, FACI, FCSCE, MIStructE is Professor of Civil and Environmental Engineering at San Jose State University.
Preface xiii
Notation xvii
Conversion Factors xxiii
1 Introduction 1
1.1 Structural Concrete 1
1.2 Historical Background 1
1.3 Advantages and Disadvantages of Reinforced Concrete 3
1.4 Codes of Practice 3
1.5 Design Philosophy and Concepts 3
1.6 Units of Measurement 4
1.7 Loads 5
1.8 Safety Provisions 6
1.9 Structural Concrete Elements 7
1.10 Structural Concrete Design 8
1.11 Accuracy of Calculations 8
1.12 Concrete High-Rise Buildings 8
References 11
2 Properties of Reinforced Concrete 12
2.1 Factors Affecting Strength of Concrete 12
2.2 Compressive Strength 14
2.3 Stress–Strain Curves of Concrete 14
2.4 Tensile Strength of Concrete 16
2.5 Flexural Strength (Modulus of Rupture) of Concrete 17
2.6 Shear Strength 17
2.7 Modulus of Elasticity of Concrete 18
2.8 Poisson’s Ratio 19
2.9 Shear Modulus 20
2.10 Modular Ratio 20
2.11 Volume Changes of Concrete 20
2.12 Creep 21
2.13 Models for Predicting Shrinkage and Creep of Concrete 22
2.14 Unit Weight of Concrete 57
2.15 Fire Resistance 57
2.16 High-Performance Concrete 58
2.17 Lightweight Concrete 58
2.18 Fibrous Concrete 59
2.19 Steel Reinforcement 59
Summary 64
References 65
Problems 66
3 Flexural Analysis of Reinforced Concrete Beams 69
3.1 Introduction 69
3.2 Assumptions 69
3.3 Behavior of Simply Supported Reinforced Concrete Beam Loaded to Failure 70
3.4 Types of Flexural Failure and Strain Limits 73
3.5 Load Factors 76
3.6 Strength Reduction Factor 𝜙 77
3.7 Significance of Analysis and Design Expressions 79
3.8 Equivalent Compressive Stress Distribution 79
3.9 Singly Reinforced Rectangular Section in Bending 82
3.10 Lower Limit or Minimum Percentage of Steel 89
3.11 Adequacy of Sections 90
3.12 Bundled Bars 93
3.13 Sections in the Transition Region (𝜙 < 0.9) 94
3.14 Rectangular Sections with Compression Reinforcement 96
3.15 Analysis of T- and I-Sections 105
3.16 Dimensions of Isolated T-Shaped Sections 112
3.17 Inverted L-Shaped Sections 113
3.18 Sections of Other Shapes 114
3.19 Analysis of Sections Using Tables 115
3.20 Additional Examples 116
3.21 Examples Using SI Units 117
Summary 119
References 122
Problems 122
4 Flexural Design of Reinforced Concrete Beams 125
4.1 Introduction 125
4.2 Rectangular Sections with Tension Reinforcement Only 125
4.3 Spacing of Reinforcement and Concrete Cover 127
4.4 Rectangular Sections with Compression Reinforcement 133
4.5 Design of T-Sections 138
4.6 Additional Examples 142
4.7 Examples Using SI Units 147
Summary 148
Problems 151
5 Shear and Diagonal Tension 155
5.1 Introduction 155
5.2 Shear Stresses in Concrete Beams 155
5.3 Behavior of Beams without Shear Reinforcement 158
5.4 Beam Shear Strength 160
5.5 Beams with Shear Reinforcement 161
5.6 ACI Code Shear Design Requirements 163
5.7 Design of Vertical Stirrups 168
5.8 Design Summary 169
5.9 Shear Force Due to Live Loads 174
5.10 Shear Stresses in Members of Variable Depth 178
5.11 Examples Using SI Units 183
Summary 186
References 187
Problems 187
6 Deflection and Control of Cracking 190
6.1 Deflection of Structural Concrete Members 190
6.2 Instantaneous Deflection 191
6.3 Long-Time Deflection 196
6.4 Allowable Deflection 197
6.5 Deflection Due to Combinations of Loads 197
6.6 Cracks in Flexural Members 206
6.7 ACI Code Requirements 209
Summary 213
References 214
Problems 215
7 Development Length of Reinforcing Bars 218
7.1 Introduction 218
7.2 Development of Bond Stresses 219
7.3 Development Length in Tension 222
7.4 Summary for Computation of Id in Tension 225
7.5 Development Length in Compression 227
7.6 Critical Sections in Flexural Members 228
7.7 Standard Hooks (ACI Code, Sections 25.4.3) 232
7.8 Splices of Reinforcement 235
7.9 Moment–Resistance Diagram (Bar Cutoff Points) 239
Summary 243
References 244
Problems 245
8 Design of Deep Beams by the Strut-and-Tie Method 248
8.1 Introduction 248
8.2 B- and D-Regions 248
8.3 Strut-and-Tie Model 248
8.4 ACI Design Procedure to Build a Strut-and-Tie Model 251
8.5 Strut-and-Tie Method According to AASHTO LRFD 259
8.6 Deep Members 260
References 277
Problems 277
9 One-Way Slabs 279
9.1 Types of Slabs 279
9.2 Design of One-Way Solid Slabs 281
9.3 Design Limitations According to ACI Code 283
9.4 Temperature and Shrinkage Reinforcement 283
9.5 Reinforcement Details 284
9.6 Distribution of Loads from One-Way Slabs to Supporting Beams 284
9.7 One-Way Joist Floor System 289
Summary 292
References 293
Problems 293
10 Axially Loaded Columns 295
10.1 Introduction 295
10.2 Types of Columns 295
10.3 Behavior of Axially Loaded Columns 296
10.4 ACI Code Limitations 297
10.5 Spiral Reinforcement 299
10.6 Design Equations 300
10.7 Axial Tension 301
10.8 Long Columns 301
Summary 304
References 304
Problems 305
11 Members in Compression and Bending 306
11.1 Introduction 306
11.2 Design Assumptions for Columns 308
11.3 Load–Moment Interaction Diagram 308
11.4 Safety Provisions 310
11.5 Balanced Condition: Rectangular Sections 311
11.6 Column Sections under Eccentric Loading 314
11.7 Strength of Columns for Tension Failure 315
11.8 Strength of Columns for Compression Failure 317
11.9 Interaction Diagram Example 322
11.10 Rectangular Columns with Side Bars 324
11.11 Load Capacity of Circular Columns 327
11.12 Analysis and Design of Columns Using Charts 331
11.13 Design of Columns under Eccentric Loading 336
11.14 Biaxial Bending 341
11.15 Circular Columns with Uniform Reinforcement under Biaxial Bending 343
11.16 Square and Rectangular Columns under Biaxial Bending 345
11.17 Parme Load Contour Method 346
11.18 Equation of Failure Surface 350
11.19 SI Example 352
Summary 354
References 355
Problems 356
12 Slender Columns 360
12.1 Introduction 360
12.2 Effective Column Length (Klu) 361
12.3 Effective Length Factor (K) 363
12.4 Member Stiffness (EI) 365
12.5 Limitation of the Slenderness Ratio (Klu∕r) 366
12.6 Moment-Magnifier Design Method 367
Summary 377
References 378
Problems 379
13 Footings 381
13.1 Introduction 381
13.2 Types of Footings 383
13.3 Distribution of Soil Pressure 384
13.4 Design Considerations 386
13.5 Plain Concrete Footings 395
13.6 Combined Footings 407
13.7 Footings under Eccentric Column Loads 413
13.8 Footings under Biaxial Moment 414
13.9 Slabs on Ground 417
13.10 Footings on Piles 418
13.11 SI Equations 418
Summary 418
References 420
Problems 421
14 Retaining Walls 423
14.1 Introduction 423
14.2 Types of Retaining Walls 423
14.3 Forces on Retaining Walls 424
14.4 Active and Passive Soil Pressures 425
14.5 Effect of Surcharge 429
14.6 Friction on the Retaining Wall Base 430
14.7 Stability Against Overturning 431
14.8 Proportions of Retaining Walls 432
14.9 Design Requirements 433
14.10 Drainage 433
14.11 Basement Walls 444
Summary 447
References 448
Problems 448
15 Design for Torsion 452
15.1 Introduction 452
15.2 Torsional Moments in Beams 453
15.3 Torsional Stresses 454
15.4 Torsional Moment in Rectangular Sections 455
15.5 Combined Shear and Torsion 458
15.6 Torsion Theories for Concrete Members 458
15.7 Torsional Strength of Plain Concrete Members 462
15.8 Torsion in Reinforced Concrete Members (ACI Code Procedure) 462
15.9 Summary of ACI Code Procedures 469
Summary 476
References 477
Problems 477
16 Continuous Beams and Frames 480
16.1 Introduction 480
16.2 Maximum Moments in Continuous Beams 480
16.3 Building Frames 485
16.4 Portal Frames 486
16.5 General Frames 488
16.6 Design of Frame Hinges 490
16.7 Introduction to Limit Design 500
16.8 The Collapse Mechanism 502
16.9 Principles of Limit Design 502
16.10 Upper and Lower Bounds of Load Factors 503
16.11 Limit Analysis 504
16.12 Rotation of Plastic Hinges 507
16.13 Summary of Limit Design Procedure 513
16.14 Moment Redistribution of Maximum Negative or Positive Moments in Continuous Beams 516
Summary 523
References 524
Problems 525
17 Design of Two-Way Slabs 527
17.1 Introduction 527
17.2 Types of Two-Way Slabs 527
17.3 Economical Choice of Concrete Floor Systems 529
17.4 Design Concepts 532
17.5 Column and Middle Strips 535
17.6 Minimum Slab Thickness to Control Deflection 536
17.7 Shear Strength of Slabs 540
17.8 Analysis of Two-Way Slabs by the Direct Design Method 544
17.9 Design Moments in Columns 569
17.10 Transfer of Unbalanced Moments to Columns 570
17.11 Waffle Slabs 581
17.12 Equivalent Frame Method 589
Summary 598
References 598
Problems 599
18 Stairs 601
18.1 Introduction 601
18.2 Types of Stairs 601
18.3 Examples 617
Summary 625
References 625
Problems 625
19 Introduction to Prestressed Concrete 627
19.1 Prestressed Concrete 627
19.2 Materials and Serviceability Requirements 637
19.3 Loss of Prestress 639
19.4 Analysis of Flexural Members 645
19.5 Design of Flexural Members 654
19.6 Cracking Moment 659
19.7 Deflection 661
19.8 Design for Shear 664
19.9 Preliminary Design of Prestressed Concrete Flexural Members 670
19.10 End-Block Stresses 672
Summary 674
References 675
Problems 676
20 Seismic Design of Reinforced Concrete Structures 679
20.1 Introduction 679
20.2 Seismic Design Category 679
20.3 Analysis Procedures 695
20.4 Load Combinations 708
20.5 Special Requirements in Design of Structures Subjected to Earthquake Loads 709
References 740
Problems 740
21 Beams Curved in Plan 742
21.1 Introduction 742
21.2 Uniformly Loaded Circular Beams 742
21.3 Semicircular Beam Fixed at End Supports 749
21.4 Fixed-End Semicircular Beam under Uniform Loading 753
21.5 Circular Beam Subjected to Uniform Loading 755
21.6 Circular Beam Subjected to a Concentrated Load at Midspan 758
21.7 V-Shape Beams Subjected to Uniform Loading 761
21.8 V-Shape Beams Subjected to a Concentrated Load at the Centerline of the Beam 763
Summary 768
References 768
Problems 768
22 Prestressed Concrete Bridge Design Based on AASHTO LRFD Bridge Design Specifications 769
22.1 Introduction 769
22.2 Typical Cross Sections 769
22.3 Design Philosophy of AASHTO Specificatioins 773
22.4 Load Factors and Combinations (AASHTO 3.4) 773
22.5 Gravity Loads 776
22.6 Design for Flexural and Axial Force Effects (AASHTO 5.6) 784
22.7 Design for Shear (AASHTO 5.8) 785
22.8 Loss of Prestress (AASHTO 5.9.3) 791
22.9 Deflections (AASHTO 5.6.3.5.2) 792
References 816
23 Review Problems on Concrete Building Components 817
24 Design and Analysis Flowcharts 840
Appendix A: Design Tables (U.S. Customary Units) 864
Appendix B: Design Tables (SI Units) 874
Appendix C: Structural Aids 882
Index 903
Erscheinungsdatum | 14.04.2020 |
---|---|
Verlagsort | New York |
Sprache | englisch |
Maße | 224 x 277 mm |
Gewicht | 2381 g |
Themenwelt | Technik ► Bauwesen |
ISBN-10 | 1-119-60511-3 / 1119605113 |
ISBN-13 | 978-1-119-60511-9 / 9781119605119 |
Zustand | Neuware |
Haben Sie eine Frage zum Produkt? |
aus dem Bereich