Perspectives in Total Hip Arthroplasty

Advances in Biomaterials and their Tribological Interactions

Buch | Softcover

182 Seiten

2018
Woodhead Publishing Ltd (Verlag)
978-0-08-101578-0 (ISBN)

Titel wird leider nicht erscheinen

Artikel merken

Total hip arthroplasty, the most commonly performed orthopedic procedure, is used to replace or reconstruct the hip with an artificial joint. Perspectives in Total Hip Arthroplasty outlines developments in technologies and biomaterials used for this procedure, with a focus on the tribological interactions of the materials used.

Part one outlines the history of total hip arthroplasty and goes on to explore advances in techniques and biomaterials. Part two focuses on the tribology of materials used to perform this procedure, explaining the impact of wear on the load-bearing surface, a major cause of failure in hip prostheses. Chapters review a range of materials, including modern biomaterials, hybrid materials, metal, ceramic, and polyethylene. The book also discusses the tribological interactions of these materials when used in total hip arthroplasty.

Perspectives in Total Hip Arthroplasty is a key resource for clinicians, researchers, and academics interested in the tribology of total hip arthroplasty, as well as materials researchers, engineers, and academics concerned with the tribology of biomaterials.

Saverio Affatato is a Medical Physicist at the Rizzoli Orthopaedic Institute (IOR). In particular he is the responsible of the Tribology area at the Medical Technology Laboratory of the IOR.

Author contact details
Woodhead Publishing Series in Biomaterials
Foreword
Introduction
Part I: Advances in total hip arthroplasty (THA) techniques and biomaterials

1. The history of total hip arthroplasty (THA)

Abstract:
1.1 Human hip anatomy
1.2 Kinematics of the hip
1.3 Biomechanics of the hip
1.4 History of total hip arthroplasty
1.5 Indications for total hip arthroplasty
1.6 References

2. The history of biomaterials used in total hip arthroplasty (THA)

Abstract:
2.1 The history of biomaterials used in total hip arthroplasty (THA)
2.2 Current THA materials and techniques
2.3 Polymers in THA
2.4 Metals in THA
2.5 Ceramics in THA
2.6 References

3. Historical techniques and designs in total hip arthroplasty (THA)

Abstract:
3.1 Introduction
3.2 Surgical approaches to total hip arthroplasty (THA)
3.3 Posterolateral surgical approach to THA
3.4 Anterolateral surgical approach to THA
3.5 Anterior surgical approach to THA
3.6 Success rate in post-op rehabilitation
3.7 Minimally invasive surgery (MIS)
3.8 References

4. Contemporary designs in total hip arthroplasty (THA)

Abstract:
4.1 Total hip arthroplasty (THA)
4.2 Hip joint diseases and fracture-related problems
4.3 Modern trends in hip joint prosthesis
4.4 Fixation methods
4.5 The femoral stem
4.6 The femoral head
4.7 The acetabular cup
4.8 Selecting prosthesis designs to suit individual patient needs
4.9 Possible complications, factors influencing durability and failures
4.10 Arthroplasty registers
4.11 Conclusions
4.12 References

5. Fixation techniques of total hip arthroplasty (THA) components

Abstract:
5.1 Introduction
5.2 Cemented techniques
5.3 Cementless techniques
5.4 Hybrid techniques
5.5 Selecting patient-specific techniques
5.6 Causes of implant failure
5.7 Conclusions
5.8 References

6. Recent developments and future trends in total hip arthroplasty (THA)

Abstract:
6.1 Introduction
6.2 Advances in biomaterials and prosthetic design
6.3 Hip resurfacing
6.4 Complications
6.5 Modern trends
6.6 Conclusions
6.6 References

Part II: Tribological interactions of biomaterials for total hip arthroplasty (THA)

7. Tribological interactions of modern biomaterials used in total hip arthroplasty (THA)

Abstract:
7.1 Friction and wear factors
7.2 Lubrication
7.3 Testing for wear in vivo and in vitro
7.4 Diagnosis and surveillance
7.5 Failure analysis
7.6 References

8. Tribological interactions of polyethylene in total hip arthroplasty (THA)

Abstract:
8.1 Introduction
8.2 Biological reactions to orthopaedic implant degradation products of polyethylene
8.3 The effectiveness of lubrication on wear and friction of bearings
8.4 Bearing performances
8.5 References

9. Tribological interactions of metal in total hip arthroplasty (THA)

Abstract:
9.1 Introduction
9.2 Biological reactions to orthopaedic implant degradation products of metal
9.3 The effectiveness of lubrication on wear and friction of bearings
9.4 Bearing performances
9.5 References

10. Tribological interactions of ceramic bearings in total hip arthroplasty (THA)

Abstract:
10.1 Introduction
10.2 Biological reactions to orthopaedic implant degradation products of ceramic bearings
10.3 The effectiveness of lubrication on wear and friction of bearings
10.4 Bearing performances
10.5 References

11. Tribological interactions of hybrid hard bearings in total hip arthroplasty (THA)

Abstract:
11.1 Introduction
11.2 Biological reactions to orthopaedic implant degradation products of hybrid hard bearings
11.3 The effectiveness of lubrication on wear and friction of bearings
11.4 Bearing performances
11.5 References

Index

Erscheinungsdatum	08.07.2016
Reihe/Serie	Woodhead Publishing Series in Biomaterials
Verlagsort	Cambridge
Sprache	englisch
Themenwelt	Medizinische Fachgebiete ► Chirurgie ► Unfallchirurgie / Orthopädie
	Medizin / Pharmazie ► Physiotherapie / Ergotherapie ► Orthopädie
	Medizin / Pharmazie ► Physiotherapie / Ergotherapie ► Rehabilitation
	Technik ► Maschinenbau
	Technik ► Medizintechnik
	Technik ► Umwelttechnik / Biotechnologie
ISBN-10	0-08-101578-X / 008101578X
ISBN-13	978-0-08-101578-0 / 9780081015780
Zustand	Neuware