Nicht aus der Schweiz? Besuchen Sie lehmanns.de

In-Vitro Diagnostic Devices (eBook)

Introduction to Current Point-of-Care Diagnostic Devices
eBook Download: PDF
2015 | 1st ed. 2015
VI, 106 Seiten
Springer International Publishing (Verlag)
978-3-319-19737-1 (ISBN)

Lese- und Medienproben

In-Vitro Diagnostic Devices - Chao-Min Cheng, Chen-Meng Kuan, Chien-Fu Chen
Systemvoraussetzungen
96,29 inkl. MwSt
(CHF 93,95)
Der eBook-Verkauf erfolgt durch die Lehmanns Media GmbH (Berlin) zum Preis in Euro inkl. MwSt.
  • Download sofort lieferbar
  • Zahlungsarten anzeigen

Addressing the origin, current status, and future development of point-of-care diagnostics, and serving to integrate knowledge and tools from Analytical Chemistry, Bioengineering, Biomaterials, and Nanotechnology, this book focusses on addressing the collective and combined needs of industry and academia (including medical schools) to effectively conduct interdisciplinary research.

In addition to summarizing and detailing developed diagnostic devices, this book will attempt to point out the possible future trends of development for point-of-care diagnostics using both scientifically based research and practical engineering needs with the aim to help novices comprehensively understand the development of point-of-care diagnostics. This includes demonstrating several common but critical principles and mechanisms used in point-of-care diagnostics that address practical needs (e.g., disease or healthcare monitoring) using two well-developed examples so far: 1) blood glucose meters (via electrochemistry); and, 2) pregnancy tests (via lateral flow assay).

Readers of this book will come to fully comprehend how to develop point-of-care diagnostics devices, and will be inspired to contribute to a critical global cause - the development of inexpensive, effective, and portable in vitro diagnostics tools (for any purpose) that can be used either at home or in resource limited areas.



Chao-Min Cheng

Chao-Min Cheng received his Ph. D. in Biomedical Engineering in 2009 from Carnegie Mellon University under the supervision of Prof. Philip R. LeDuc. He then did his post-doctoral training with Prof. George M. Whitesides at Harvard University where he helped develop paper diagnostic systems to address global public health concerns. He is currently an independent P.I., tenured Associate Professor, at National Tsing Hua University, Taiwan, where he started in the summer of 2011. He has been blessed to receive a Distinguished Young Investigator Research Grant from the National Science Council in Taiwan, and was awarded 'Excellent Performance on Intellectual Property & Technology Transfer' by his school twice (2012 & 2013). He is currently an Acting Member of the International Affairs/Globalization Committee for the Biomedical Engineering Society (BMES), an Editorial Board Member for Sensor Letters and Journal of Cellular and Molecular Medicine and the Guest Editor for Talanta. In addition to his many academic contributions, Dr. Cheng serves as a consultant for biotechnologically relevant companies around the world with approximately 20 patent groups pending (in Taiwan, China, U.S.), and is the co-Founder of start-up companies in Taiwan and the U.S.

Chen-Meng Kuan

Chen-Meng Kuan is a Ph.D. student of the Institute of Nanoengineering and Microsystems at National Tsing Hua University, Taiwan. He received his M.S. from the Institute of Nanoengineering and Microsystems, National Tsing Hua University, in 2010 under the supervision of Prof. Chao-Min Cheng. His main research interest is to develop low-cost analytical devices for biochemical analysis. Specifically, he has worked and continues to work on the development of cotton-based, PDMS-based, and lignocellulosic-based analytical devices for on-site implementation of point-of-care testing and food safety analysis.

Chien-Fu Chen

Chien-Fu Chen is an Assistant Professor at the Graduate Institute of Biomedical Engineering, National Chung Hsing University, Taiwan. He received his Ph. D. from the Institute of Applied Mechanics, National Taiwan University in 2007. He then did his postdoctoral research on sensing platforms using carbon-based nanomaterials at the University of Maryland, College Park with Cheng S. Lee and YuHuang Wang in the Department of Chemistry and Biochemistry, and on polymeric-based liquid chromatography systems with Don L. DeVoe in the Department of Mechanical Engineering from 2007 to 2011. Prof. Chen's research focuses on the development of miniaturized systems using micro/nanomaterials for biomedical point-of-care sensing applications that are affordable, sensitive, specific, user-friendly, rapid, robust, and are operable without additional complicated equipment. In addition to being a PI on several research projects, he has also served on program committees and as section chair for over 10 workshops and conferences. In 2014, he received the Young Faculty Award from the College of Engineering, National Chung Hsing University.

Chao-Min ChengChao-Min Cheng received his Ph. D. in Biomedical Engineering in 2009 from Carnegie Mellon University under the supervision of Prof. Philip R. LeDuc. He then did his post-doctoral training with Prof. George M. Whitesides at Harvard University where he helped develop paper diagnostic systems to address global public health concerns. He is currently an independent P.I., tenured Associate Professor, at National Tsing Hua University, Taiwan, where he started in the summer of 2011. He has been blessed to receive a Distinguished Young Investigator Research Grant from the National Science Council in Taiwan, and was awarded “Excellent Performance on Intellectual Property & Technology Transfer” by his school twice (2012 & 2013). He is currently an Acting Member of the International Affairs/Globalization Committee for the Biomedical Engineering Society (BMES), an Editorial Board Member for Sensor Letters and Journal of Cellular and Molecular Medicine and the Guest Editor for Talanta. In addition to his many academic contributions, Dr. Cheng serves as a consultant for biotechnologically relevant companies around the world with approximately 20 patent groups pending (in Taiwan, China, U.S.), and is the co-Founder of start-up companies in Taiwan and the U.S.Chen-Meng KuanChen-Meng Kuan is a Ph.D. student of the Institute of Nanoengineering and Microsystems at National Tsing Hua University, Taiwan. He received his M.S. from the Institute of Nanoengineering and Microsystems, National Tsing Hua University, in 2010 under the supervision of Prof. Chao-Min Cheng. His main research interest is to develop low-cost analytical devices for biochemical analysis. Specifically, he has worked and continues to work on the development of cotton-based, PDMS-based, and lignocellulosic-based analytical devices for on-site implementation of point-of-care testing and food safety analysis.Chien-Fu ChenChien-Fu Chen is an Assistant Professor at the Graduate Institute of Biomedical Engineering, National Chung Hsing University, Taiwan. He received his Ph. D. from the Institute of Applied Mechanics, National Taiwan University in 2007. He then did his postdoctoral research on sensing platforms using carbon-based nanomaterials at the University of Maryland, College Park with Cheng S. Lee and YuHuang Wang in the Department of Chemistry and Biochemistry, and on polymeric-based liquid chromatography systems with Don L. DeVoe in the Department of Mechanical Engineering from 2007 to 2011. Prof. Chen’s research focuses on the development of miniaturized systems using micro/nanomaterials for biomedical point-of-care sensing applications that are affordable, sensitive, specific, user-friendly, rapid, robust, and are operable without additional complicated equipment. In addition to being a PI on several research projects, he has also served on program committees and as section chair for over 10 workshops and conferences. In 2014, he received the Young Faculty Award from the College of Engineering, National Chung Hsing University.

Introduction to In-Vitro Diagnostic Devices.- Polymeric-based In-Vitro Diagnostic Devices.- Low-cost In Vitro Diagnostic Technologies.- Glucose Sensor and its Potential Directions.

Erscheint lt. Verlag 16.7.2015
Zusatzinfo VI, 106 p. 50 illus., 40 illus. in color.
Verlagsort Cham
Sprache englisch
Themenwelt Medizin / Pharmazie
Technik
Schlagworte In-Vitro Diagnostic Devices (IVD) • Matrix-based Functional Devices • Point-of-care Diagnostic Devices • Rapid Diagnosis / Early-stage Diagnosis • Translational Science / Translational Medicine
ISBN-10 3-319-19737-1 / 3319197371
ISBN-13 978-3-319-19737-1 / 9783319197371
Haben Sie eine Frage zum Produkt?
PDFPDF (Wasserzeichen)
Größe: 4,4 MB

DRM: Digitales Wasserzeichen
Dieses eBook enthält ein digitales Wasser­zeichen und ist damit für Sie persona­lisiert. Bei einer missbräuch­lichen Weiter­gabe des eBooks an Dritte ist eine Rück­ver­folgung an die Quelle möglich.

Dateiformat: PDF (Portable Document Format)
Mit einem festen Seiten­layout eignet sich die PDF besonders für Fach­bücher mit Spalten, Tabellen und Abbild­ungen. Eine PDF kann auf fast allen Geräten ange­zeigt werden, ist aber für kleine Displays (Smart­phone, eReader) nur einge­schränkt geeignet.

Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen dafür einen PDF-Viewer - z.B. den Adobe Reader oder Adobe Digital Editions.
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen dafür einen PDF-Viewer - z.B. die kostenlose Adobe Digital Editions-App.

Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.

Mehr entdecken
aus dem Bereich