Innovative Materials and Engineering Research
Trans Tech Publications Ltd (Verlag)
978-3-03835-559-5 (ISBN)
Collection of selected, peer reviewed papers from the 2015 International Conference on Innovative Research (ICIR 2015), May 14-16, 2015, Iasi, Romania.
The 68 papers are grouped as follows:
Chapter 1: Geopolymers;
Chapter 2: Applied Materials and Processing Technologies;
Chapter 3: Materials and Technologies in Construction;
Chapter 4: Technologies of Waste Recycling and Environmental Engineering;
Chapter 5: Engineering Technology;
Chapter 6: Materials and Technologies in Conservation of Cultural Heritage
Preface and Conference Organization
Chapter 1: Geopolymers
A Review on Processing and Properties of Bottom Ash Based Geopolymer Materials
Development of Fly Ash-Based Geopolymer Lightweight Bricks Using Foaming Agent - A Review
Review of Geopolymer Materials for Thermal Insulating Applications
The Effect of Solid-to-Liquid Ratio and Temperature on Mechanical Properties of Kaolin Geopolymer Ceramics
The Electrical Resistivity of Geopolymer Paste by Using Wenner Four Probe Method
A Review on Mechanical Properties of Geopolymer Composites for High Temperature Application
Fire Resistant Properties of Geopolymers: A Review
Epoxy Hardener Filled with Geopolymer Materials for Piping Application: Flexural Properties
Chapter 2: Applied Materials and Processing Technologies
Comparative XRD and Microstructure Analysis on Biodegradable Mg-Si-Ca Alloys
Considerations Regarding Sandblasting Metal Surfaces Designed for Electric Arc Spraying
Copper Flow Simulation to Severe Plastic Deformation by Multiaxial Forging
Corrosion Behavior in Saline Medium for a Cu-Zn Casting Alloy
Dry Lubricant Materials Deposited by Magnetron Sputtering and Friction Coefficients Evaluation
Friction and Wearing Behaviour of Sintered Composites Made from Copper Mixed with Carbon Fibers
Influence of Process Parameters on the Properties of TiO2 Films Deposited by a D.C. Magnetron Sputtering System on Glass Support
Investigation of Copper-Silver Solders Properties in Liquid State before Amorphization
Preliminary Results on Microstructural, Chemical and Wear Analyze of New Cast Iron with Chromium Addition
Processing and Superelasticity of Ni-Ti Shape Memory Alloys
Relaxation Processes Features of Glass-Forming Melts on the Basis of Copper
Researches Regarding the Influence of Technological Parameters on the Alloying Efficiency in Powder Injection Process
Review on the Application of Natural Fiber Composite via Filament Winding Using Different Resin
Sol Gel Synthesis and In Vitro Evaluation of Apatite Forming Ability of Silica-Based Composite Glass in SBF
The Effect of Storage Time on the Composition of the Olive and Sunflower Oils
Thin Films Based on Tungsten Carbide with Binary, Ternary and Quaternary Composition, Obtained by Magnetron Sputtering
Assessment of Synthetic Quenching Media for Hardening
Considerations on the Specific Phenomena in Metal Heating when Using Electrolytic Plasma
Synthesis of Nanosized Silica and Silver-Doped Silica Nanoparticles for Heat Transfer Fluids Applications
Researches on Structural Factor Involvement in Oral Tribology
Study Regarding the Influence of Different Antiseptic Mouthwashes on Surface Roughness of Traditional Glass Ionomer Cements
Chapter 3: Materials and Technologies in Construction
Laboratory Investigations for Strength Grading of Spruce Timber Elements
Testing Procedure for Timber Strength Grading
Non-Destructive Vibration Tests on Reinforced Concrete Structures
Thermal Studies of Specific Envelope Solutions for an Energy Efficient Building
Strengthening of Masonry Walls Using Fiber Reinforced Polymer (FRP) Materials
A Holistic Approach to a Sustainable Steel Building
Carbon Fiber Strips Retrofitting System for Precast Reinforced Concrete Wall Panel
Chemical Deposition of Thin Layers on Reinforcing Steel
Ballasted Track versus Ballastless Track
Formulation for Stress Intensity Factors and J-Integral Calculation by Eddy Current Testing
Mechanical and Thermal Performance of Straw Bales
The Pozzoolanic Activity Level of Powder Waste Glass in Comparisons with other Powders
Study Concerning the Thermal Insulation Panels with Double-Side Anti-Condensation Foil on the Exterior and Polyurethane Foam or Polyisocyanurate on the Interior
A Review – Manufacturing on Rubberized Concrete Filled Recycled Tire Rubber
Chapter 4: Technologies of Waste Recycling and Environmental Engineering
Physico-Chemical Parameters in Mountain Freshwater: Cuejdi River from Eastern Carpathians, Romania
The Recycling of Materials - From Green Marketing Strategy to the Need for Sustainable Development in Contemporary Society
Innovative Synergistic Valorization of Lignite Fly Ash and Steel Industry Scrap-Soil as Secondary Resources for Compacted Ceramics
Layered Double Hydroxides (LDHs) Type Materials Used in Water Treatment
Removal of Iron and Total Chromium Contaminations in Landfill Leachate by Using Electrocoagulation Process
Synthesis of Alum from Discarded Aluminium Beverage Cans
The Biomaterial Relevance of Oxytocin in Some Zebrafish Studies
Characteristics Evolution of Transylvanian Sand after Biogrout Treatment
Review of Soil Stabilization Techniques: Geopolymerization Method one of the New Technique
Respiratory Parameters-Based Approach to Assessing Dust Loading
Chapter 5: Engineering Technology
Determination Performance of Thermoacoustic Heat Engine Simulation by Delta EC Software
Electromagnetic Sensors for Improvement of Damage Detection in Composite Materials Reinforced with Carbon Woven Fibers
Elements of Modeling and Simulation for Piezoelectric Motors
Quality Comparison of Analog and Digital X-Ray Equipment and Materials in a Dental Clinic
The Rationalization of Production of Ring-Shaped Drop Forgings Using Computer Simulation of Closed-Die Forging Process
Structural Health Monitoring System, Development and Testing
Laser Cutting of Coronary Stents: Progress and Development in Laser Based Stent Cutting Technology
Design Practitioner Perception in Determining the Terminology of Biomimicry, Anthropomorphised and Semantic (BAS) in Design Application
Experimental Study of Active Vibration Control of a Flexible Beam System Using Iterative Learning Algorithm
Inverse Problems Using Neural Networks for Cracks Characterization in Materials
Chapter 6: Materials and Technologies in Conservation of Cultural Heritage
Impact on Surface Treatment of Hydrophobic Consolidation Terracotta Ornaments
The Effects of Incenses’ Smoke on Different Types of Varnishes
Stone Monuments Consolidation with Nanomaterials
The Study of Ornamental Gildings in Old Tempera Icons from the XVIII-th Century
Study of an Old Coin Set Using Nondistructive Techniques
| Erscheinungsdatum | 03.10.2015 |
|---|---|
| Reihe/Serie | Key Engineering Materials |
| Zusatzinfo | Illustrations, unspecified |
| Verlagsort | Zurich |
| Sprache | englisch |
| Maße | 170 x 240 mm |
| Gewicht | 900 g |
| Themenwelt | Technik ► Bauwesen |
| Technik ► Elektrotechnik / Energietechnik | |
| Technik ► Maschinenbau | |
| Technik ► Umwelttechnik / Biotechnologie | |
| ISBN-10 | 3-03835-559-3 / 3038355593 |
| ISBN-13 | 978-3-03835-559-5 / 9783038355595 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
