Structural Integrity of Welded Structures XI
Trans Tech Publications Ltd (Verlag)
978-3-03835-492-5 (ISBN)
This volume includes selected papers presented at the 11th International Conference Structural Integrity of Welded Structures (ISCS15).The event brought together researchers from institutes and universities from different countries in order to discuss actual topics of structural integrity of welded and jointed structures from the practical point of view as well as that of the material testing specialists. A particular attention was given to practical problems coming from the industry. The volume includes 46 selected papers from the 54 full papers that were submitted. The authors highlight the results of their own research and development activity, carried out in the frame of their institutes and universities from Romania, Serbia, Bulgaria, Czech Republic and Israel.
Preface, Committees and Sponsors
Scratch Test and Adhesion Properties of Titanium Coatings Deposited by TIG Welding on Steels
Physical and Geometrical Quality of X2CrNi18-9 Stainless Steel Surfaces Cut with Abrasive Waterjet - Work Hardening of Marginal Layer
About the Influence of Butt Weld Joints Geometry on the Damage Detection Process
Improving a Brazed Joint Structure, with a New Ecological Brass
Chemical Active Coated Rods Used for Brazing
Transformation Reactions by TIG Welded Joints of the Alloyed Steels Used for Endless Saw Blades
Advanced Metallic Materials with Amorphous Structure Used for Resistance Brazing Joints
Reconditioning of Crankshaft in the Automotive Industry by Using TIG Welding
Structural Analysis for Joining Dissimilar Thin Sheets with CMT (Cold Metal Transfer) Process
The Evaluation of Different Types of Welding in the Orthodontic Expanders
Structure and Mechanical Properties of AlSi10Mg Fabricated by Selective Laser Melting Additive Manufacturing (SLM-AM)
The Influence of the Path of Corner Gussets Weld Seam over the Stress Concentration Factors of the Tubular T Joints
Nondestructive Method for the Determination of the Elastic Properties of Welded Aluminum Plates
Investigation on the Flash Butt Welding of 51CrV4 Steels for Saw Blades
Effect of Heat Treatment on the Surfaces Topography Tested at the Cavitation Erosion from Steel 16MnCr5
Influence of some Oxide Coating Layers on the Mechanical Properties of Steel Plates
Diffusion Bonding of Ceramics by Spark Plasma Sintering (SPS) Apparatus
Influence of Phase Shift and Amplitude Ratio on the Principal Stresses and Directions in Multiaxial Fatigue Testing
Application of Fracture Mechanics to Determine the Remaining Lifetime of the Old Steel Bridges Decks
Effect of Solution Treatment Temperature upon the Cavitation Erosion Resistance of X5CrNi18-10 Stainless Steel
Compatibility of Endurance Limit and Fatigue Crack Growth Parameters in Evaluation of Low Alloyed Steel Welded Joint Behaviour
Mechanical Hardening and Resistance to Cavitation Erosion of the Austenitic Stainless Steels with Varying Proportions of Delta Ferrite
Reduction of Cavitation Erosion of the Bronze CuAl10Ni5Fe2.5Mn1 by Laser Remelting Treatment
On the Influence of Damage-Caused Global Stiffness Decrease upon Structural Modal Parameters
The Influence of Cooling Rate from High Temperature upon the Cavitation Erosion Resistance of the Duplex Stainless Steel X2CrNiMoN22-5-3
Evaluation of Secondary Hardening and Microstructure in the Real T24 Steel Weld Joint
Built-Up Cold-Formed Steel Beams with Corrugated Webs Connected with Spot Welding
Stresses and Strains in Main Gas Pipelines due to Ramifications
Pre-Cambering in Steel and Composite Bridge Structures
Life Prediction in Two Types of Cracks at Eye-Bars of the Cantilever Bridges
Effect of Corrosion and Cracks at the Historical Steel Bridges
Damage of Reinforced Concrete Structures due to Steel Corrosion
Evaluation of Fracture Toughness for P355NH Steel Subjected to Thermal Cycles Simulation
Investigation of a Camshaft Repaired by Welding Using the Vibration Signal Analysis
Shear Strength Variation for PLmT Welded Zn Coated Advanced High Strength Steels Used in Automotive Structures in Overlap Configuration
Influence of Process Parameters and Geometry of the Spraying Nozzle on the Properties of Titanium Deposits Obtained in Wire Arc Spraying
Determining the Properties and Structure of Welded Copper Plates and Establishing their Connection with the Temperature Field Distribution in the Studied Zones
Structural Connections of Steel Building Frames under Extreme Loading
Design by Qualification Testing of Reduced Beam Section Welded Connections
Optimization of Laser Beam Cutting Process Parameters of Austenitic Materials
Failure Analysis of Ni Based Superalloys Welded Joints
Structural Hardening of Excavator Teeth Used in Exploitation of Magmatic Rocks
Structural and Functional Characterization of Ultrasonic Joining for Multiwire Conductors for Automotive Industry
Joining of Y2O3-Doped Aluminum Nitride with High Density Graphite by Spark Plasma Sintering
Investigations on Structural Integrity of a Petrochemical Component
Case Study on Failures of Thermoplastics Pipeline Systems
| Erscheint lt. Verlag | 7.8.2015 |
|---|---|
| Reihe/Serie | Advanced Materials Research |
| Zusatzinfo | Illustrations, unspecified |
| Verlagsort | Zurich |
| Sprache | englisch |
| Maße | 170 x 240 mm |
| Gewicht | 650 g |
| Themenwelt | Technik ► Bauwesen |
| Technik ► Maschinenbau | |
| ISBN-10 | 3-03835-492-9 / 3038354929 |
| ISBN-13 | 978-3-03835-492-5 / 9783038354925 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
