Advances in Applied Materials and Electronics Engineering II
Trans Tech Publications Ltd (Verlag)
978-3-03785-668-0 (ISBN)
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This collection of 145 peer-reviewed papers, presented as a one-volume set, covers the latest advances in Nanoscience and Nanotechnology, Structural and Materials Science, Building Materials, Chemical and Materials Engineering, Environmental Engineering and Materials Science, Electrical and Electrical Materials, Mechatronics, MEMS/NEMS, Information and Computational Materials Science, Material Science and Technology, Construction technology and Materials Science and other related fields. Taken together with its coverage of applications, this collection will be welcomed by anyone interested in these subjects.
Preface, Sponsors and Committtees
Chapter 1: Nanoscience and Nanotechnology
Effect of Pd Nanocrystals on Resistive Switching Characteristics in HfOx Memory Devices
Nanostructured Doped Silica Films Application as Sensitive Layers for Chemical Sensors
Development of Nanoemulsion Formulations of Ginger Extract
Characterization of Plasmonic Silicon Solar Cells Using Indium Nanoparticles/TiO2 Space Layer Structure
Fabrication of ZnO Nanowall-Based Hydrogen Gas Nanosensor
Effects of Grooved Surface with Nano-Ridges on Amplification of Hydrophobic Property
New Two-Step Preparation and Characterization of Submicron ZnO Rods Arrays
The Study on Deposition Process and Mechanical Properties of Deposited Cu Thin Films Using Molecular Dynamics
Progress on Cytotoxicity In Vitro of Carbon Nanotubes
Synthesis of Nanosized Pseudoboehmite and γ-Al2O3 by Control Precipitation Method
Progress on Chitosan Nanoparticles as Drug Delivery Carriers
Preparation and Characterization of Folate-Decorated Chitosan Microspheres as a Sustained-Release Drugs Carrier
Effect of Thermal Treatment on the Texture and Structure of Sol-Gel Derived Carbon Nanotube/Silica Composites
Effect of SiO2 Particle Size on Optical Properties of TiO2-SiO2 Nanocomposite Thin Films
Chapter 2: Chemical and Materials Engineering
Processing, Thermal Behavior and Tensile Properties of PLA/Thermoplastic Starch/Montmorillonite Nanocomposites
Electerochemical Study of Speek/Cloisite 15A®/TAP Membrane at Moderate Temperature for DMFC Application
High Performance Transparent Conducting Sb-Doped SnO2 Films Fabricated by Spray Pyrolysis
Modified Nafion Membranes by Catalytic Materials for Direct Methanol Fuel Cells Applications
Solvents-Induced Structure Transitions in Copolymer Films
Chapter 3: Construction and Materials Science
Experimental Study of Suffusion in Granular Soils
Software Implementation of the Algorithm the Statistical Straggling of the Mechanical Properties of Materials in the Design of Structures
Structural Performance of Disaster Relief Housing Units Subjected to Cyclic Loading
Assessment of the Corrosion Characteristics of the Carbon Steel under Different Atmospheric Environments
Assessment of Shear Behaviors of a Web Panel with Free Lower Boundary
Minimum Weight Design of Pre Engineered Steel Structures Using Built-up Sections and Cold Formed Sections
Rigid-Body Contact Using Finite Particle Method
Influence Law of Middle Tower on Mechanical Performance of Three-Tower Self-Anchored Suspension Bridge
The Effects of Applied Stress and Test Temperature on the Environment-Induced Cracking Behavior of Carbon Steel in NH4NO3 Solution
Experimental Research on Performance Change Regularity of Road Asphalt with Multiple Aging and Regeneration
Non-Coaxial Plasticity Constitutive Modeling of Sands
Influence of Bentonite Content on the Static Liquefaction Behavior of Sand
Preparation of Coal Gangue Cement Mortar
Evolution Model of Concrete Failure Surface under the Action of Load and Frezee-Thaw Cycles
Application of the Phase Change Material in Building Energy Efficiency
The Effect of Fly Ash on Lime Mortar on Elevated Temperature
Retrofitting Bond of Damaged Concrete Surface in Harbour Structures
Preparation and Characterization of Organically Modified Sepiolite by Octadearyl Dimethyl Ammonium Chloride
Chapter 4: Environmental Engineering and Materials Science
A Study on Hydrogen Sulphide as Potential Tracer in Landfill Gas Monitoring
Kinetic Study of Methyl Orange Adsorption from Solution by IOCZ
Removing Lead Ions from Aqueous Solutions with Sulfur-Impregnated Adsorbents
Accumulation and Distribution of Soil Organic Carbon in Phragmites communis Wetlands Restored with Ecological Engineering
A Strategy of Sustainable Environment Management: The Case Study of Wutai Township in Taiwan
Assessment of the Influence of Carbon Absorption Efficiency of Plants with High Concentration Sulfur Dioxide
To Recognize Sources of Pollution in Dapeng Bay by Sediment Quality in Southern Taiwan
Study on the Technology for Underground Treatment of XingFu Mine Water
Research for Biodegradation and Bioaugmentation of Drilling Wastewater
Implementation of Microbial Fuel Cells (MFCs)-Based Wastewater Treatment
A Software for Estimating Cosmic Radiation Exposure of Aircraft Crew
A Critical Evaluation of Nuclear Power Plant Project in China
The Application Analysis of Sprinkling and Drip Irrigation Technology in the Ecological Environment Construction
Analysis on Variation Characteristics of Precipitation Time Series in Weihe River Basin during the Past 55 Years
Experimental Analysis for Piezoelectric Transducers Applications into Roads Pavements
Chapter 5: Electronics and Materials for Electronics
Optimizing and Analysis for the Microchannel Heat Sink of High-Power LED Array
Photocurrent Enhancement between Two Coplanar Schottky-Barriers on Silicon MSM Photodetector
Two-Diode Model Analysis and Experimental Verification for Photovoltaic Cells
Enhanced Photoluminescence of YInGe2O7:Eu3+,Li+ Phosphor Prepared Using the Solid-State Method
Influence of Annealing Atmosphere on the Characteristics of Sol-Gel Derived ITO Thin Films
Generation of Dense Lying Ga(As)Sb Quantum Dots for Efficient Quantum Dot Lasers
Experiments with Phase-Delay and Time-Delay Methods for Slow Light in Photonic Crystal Waveguide
Comparative Study on Off-State Breakdown Characteristics in Nanowire Junctionless and Inversion Mode Multiple Gate MOSFET
Preparation of 100 GHz InP Transferred Electron Devices
Optimum Patch Dimension Ratio of T-Shaped Microstrip Antenna
Characteristics of Lead Free Ferroelectric Thin Films Consisted of (Na0.5Bi0.5)TiO3 and Bi4Ti3O12
Fabrication of Simple GaAs Solar Cell by Zn Diffusion Method
Synthesizable Digital Phase Locked Loop Implementation
Chapter 6: Material Processing. Technologies and Solutions
Effect of The Sigma Phase on the Mechanical Properties of a Cast Duplex Stainless Steel during the Ageing Treatment at 850°C
Study on the Desulphidation in Basic Electrode Welding
Rolling Process for the Continuous Forming of Curved Surface Parts Based on Bended Rolls
The Effect of Directional Flow of Metallic Melt on the Structure of Cast Metal
Friction and Wear Properties of Aluminum Matrix Composites Reinforced by Coated Carbon Fibers
Effect of Molding Temperature Conditions upon Titanium Mesh MEA Performance for Direct Methanol Fuel Cell
The Effect of Substrate on Continuous Electrohydrodynamic Printing
Analysis of the Necking Behaviors with the Crystal Plasticity Model Using 3-Dimensional Shaped Grains
Influence of the Milling Weld Toe and WIG Remelting Reconditioning Technology to Welded Pieces in the Case of Fatigue Testing
Chapter 7: Mechatronics, Measurements and Control
A New Intelligent Fault Recognition Method for Gearbox
Intelligent Rotor Fault Identification Method Based on HWD Energy Distribution and Grey Relation Degree
New Estimation Method of Sample Properties in Dynamic AFM
Model and Simulation of Six-DOF Parallel Platform Based on Direct Drive Volume Control
Research of Roll Processing Instrument Upgrading and Improvement
An Improved DV-HOP Localization Algorithm Based on Simulation Curve Fitting
Review and Prospect for the Land Seismic Data Acquisition System
The Design of Acquisition System of Compact Seismic Recorder
Image Reconstruction Based on TV Minimization and OS-EM Method in Linear Scan CT
A Smart Access Control System Based on ARM
A Path Recognition Algorithm Based on Image Process for Smart Car
Research on Motion Compensation for Airborne SAR Interferometry System
Design and Realization of New Vehicle Attitude Measurement System
Using Single-Cycle-Related Electromagnetic Vector Sensors to Estimation DOA and Polarization Parameters
Uncertainty Evaluation in Distance Measurement by CMM Based on Monte Carlo Method
A Novel Type Compact FBG-Based Micro-Displacement Sensing Machine Using a Temperature-Bias Self-Compensating Technique
A Fabrication for Ameliorating Pyroelectric Harvesting Converters
High-Q Silicon-on-Insulator Micro-Ring Resonator with Silica Covering
Single Camera Stereo with Planar Mirrors
Research and Simulation on the Maximum Power Tracking Control of the Wind-Light Complementary Power Generation System
Path Planning Based on EMD and Partial Distance Feature Vector Matching with Fuzzy Logic for Indoor Robotic
Design and Analysis of Two Gun Salute Control Systems Based on Singlechip and PLC
A Novel Closed-Loop Time-Delayed Filter for Unstable System
The Presentation of the Quarternary Super-Wavelet Wraps and Applications in Material Science
Movement Measurement Systems for fMRI Motion Studies
Seismic Data Collection Circuit Design of Seismograph Used in Complex Mountainous Area
The Algorithm to Measure Crack Width with Incircle
Research on Monitoring of Moisture Content in Transformer Oil by Using Sensors
Image Fusion Method Based on Universal Hidden Markov Tree Model in the Contourlet Domain
Evaluation Method for Band Selection Algorithms of Hyperspectral Image
Chapter 8: Networks Communication and Information Technologies
Efficient Beacon Collision Detection/Avoidance Mechanism in WLAN-Based Mesh Networks
A Detection Model of Customer Alive in Information Management Application
An Android-Based Interactive Museum Exhibit System Using Wireless Sensing and Augmented Reality Technologies
Using Portable-Profile to Support Context-Aware Services in the UPnP Networks
Electric Field Uniformity Characteristic of a Reverberation Chamber with a Composite QRD
A Study of Biorthogonal Four-Variable Wavelet Wraps with Three-Scale and Applications in Finance Management
Application of Web Data Mining in On-Line Education
A Lightweight Serverless RFID Tag Search Protocol
Region-Based Efficient Beam Handover Scheme in IEEE 802.11 Wireless Networks
Remote Access the ZigBee Sensor Network through the IP Network
DPRoPHET Routing in Delay Tolerant Network
The New Mechanism to Detect and Prevent BlackHole Attacks on AODV-Based MANET
Application of WLAN Information Transmission and System Security Technology in the Smart Substation Network
Improvement of the Expert System Shell Pro/3 Sentence Input Function and Exploration of Batch Computers Security Assessment
Experiment Research of Dynamic Load Balancing Algorithm Based on Task Classification for Data Retrieval
UML Modeling of Diagram Document Online Approval Process
Word Segmentation Method Based on Conditional Random Fields in China's Stock Market Arbitrage Analysis: A Case Study of Shanghai a Share Market
Performance of Two Space-Time-Frequency the Coding Schemes in Frequency Selective Channel
Disjoint Network Reliability Index Algorithm in the Application of the Power Communication Network
Mean Square Asymptotic Stability of Neutral Stochastic Neutral Networks with Multiple Time-Varying Delays
Development of an Internet of Civil Infrastructure Framework
Research on the Technology of XML Faceted Search Based on User’s Cognitive
A Geographic Flooding Scheme for Air-Dropping and Node-Assembling Applications Using MANETs
Design and Implementation of Wireless Communication System Based on CC1101
Double Sideband Suppressed Carrier Performance with Optical Balanced Detection
Time-Space Characteristics Distribution of Traffic Accidents Based on Clustering Analysis
Chapter 9: Engineering Management
The Application and Research of Value Engineering for International EPC Project
Management and Compilation for Shop Drawing
Research on Vehicle Schedule Problem for Drop and Pull Transport of Port
An Empirical Analysis of the Regional Influence of FDI on Energy Efficiency in China
The Research of Test System of Notebook Use Reliability
Multiple Deliveries of Two-Warehouse Deteriorating Production-Inventory Model
Developing a Model for Risk and Responsibility Management Share Amongst Stakeholders Consortium in Construction Projects
Concepts of Risk in Construction Projects
Chapter 10: Other Topics
FIR Digital Filter Design Based on Virtual Instrument
Building the Model of Near-Level Coal Deposit
The Traits of Canonical Banach Frames Generated by Multiple Scaling Functions and Applications in Applied Materials
Stagnant Nonuniform Acoustic Wave
Comparison of Three Short Term Wind Power Forecasting Methods
Probabilistic Reactive Power Optimization of Distribution Network Considering Stochastic Wind Speed and Load
An Overview of Osmotic Power: A Viable Power Generation Technology for Present and Future
| Reihe/Serie | Advanced Materials Research |
|---|---|
| Zusatzinfo | Illustrations, unspecified |
| Verlagsort | Zurich |
| Sprache | englisch |
| Maße | 170 x 240 mm |
| Gewicht | 1400 g |
| Themenwelt | Technik ► Elektrotechnik / Energietechnik |
| Technik ► Maschinenbau | |
| ISBN-10 | 3-03785-668-8 / 3037856688 |
| ISBN-13 | 978-3-03785-668-0 / 9783037856680 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
