Gas Sweetening and Processing Field Manual
Gulf Professional Publishing (Verlag)
978-1-85617-982-9 (ISBN)
Although the processing of natural gas is in many respects less complicated than the processing and refining of crude oil, it is equally as necessary before its use by end users. The actual process used to separate oil from natural gas, as well as the equipment that is used, can vary widely. Gas Sweetening and Processing Field Manual provides engineers with the ability to understand and select the most efficient and cost effective method to fit their individual needs. Designed for engineers, technologists, and operations personnel involved in the design and operation of gas processing facilities, the book starts with an explanation of the terms and theories used throughout the industry. This is followed by clear and rigorous exposition of sweetness processes such as Solid Bed Adsorption, Chemical Solvents, Physical Solvents, Distillation, and Gas Permeation. Exercises appear at the conclusion of each chapter with hints in addition to full solutions.
Other topics include Design Procedure, Design Examples, Problems and Practical Solutions, Value of NGL Components, Liquid Recovery Process, Absorption/Lean Oil Process, Joule-Thomson, Refrigeration and Cryogenic (Expansion Turbine) Plants. Chapters involving applications cover Direct Conversion of H2S to Sulfur, Removal of H2S to Meet Pipeline Qualities, Removal of CO2 to Meet Pipeline Qualities and Selection Charts.
Engineers and process designers will find this text a valuable guide to gas sweetening process and equipment, both in terms of its application to efficient and cost effective operations. It will prove particularly useful to readers who want a "quick reference" guide to field operations and procedures as well as those readers who wish to increase their knowledge of best practices.
Dr. Maurice Stewart, PE, a Registered Professional Engineer with over 40 years international consulting experience in project management; designing, selecting, specifying, installing, operating, optimizing, retrofitting and troubleshooting oil, water and gas handling, conditioning and processing facilities; designing plant piping and pipeline systems, heat exchangers, pressure vessels, process equipment, and pumping and compression systems; and leading hazards analysis reviews and risk assessments. Ken Arnold was President of K. Arnold Consulting, Inc., providing expert consulting services to the oil and gas industry covering surface engineering, project management, and project development. Ken retired from the industry in 2022. Previously, he was Senior Technical Advisor for Worley Parsons and CEO of Paragon Engineering Services, now owned by Wood Group. Ken earned a BSCE in civil engineering from Cornell University and a MS in civil engineering from Tulane University.
Part One: Gas Sweetening
Section One: Acid Gas Considerations
Section Two: Sweetening Processes
Section Three: Solid Bed Absorption
Section Four: Chemical Solvents
Section Five: Physical Solvents
Section Six: Direct Conversion oh H2S to Sulfur
Section Seven: Distillation Process
Section Eight: Gas Permeation Process
Section Nine: Design Procedure
Section Ten: Design Examples
Section Eleven: Problems and Practical Solutions
Part Two: Gas Processing
Section One: Gas Processing Overview
Section Two: NGL Recovery
Section Three: Value of NGL Components
Section Four: Liquid Recovery Process
Section Five: Absorption/Lean Oil Process
Section Six: Joule-Thomson
Section Seven: Refrigeration
Section Eight: Cryogenic (Expansion Turbine) Plants
Section Nine: Process Selection
Section Ten: Fractionation
Section Eleven: Design Considerations
| Erscheint lt. Verlag | 6.12.2011 |
|---|---|
| Verlagsort | Oxford |
| Sprache | englisch |
| Maße | 111 x 187 mm |
| Gewicht | 190 g |
| Themenwelt | Technik ► Elektrotechnik / Energietechnik |
| ISBN-10 | 1-85617-982-6 / 1856179826 |
| ISBN-13 | 978-1-85617-982-9 / 9781856179829 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
