Advances in MEMS and Microfluidic Systems
IGI Global
978-1-6684-6956-9 (ISBN)
|Rajeev Singh - Editor| is working as Associate Professor (Mechanical Engineering) in Amity University Uttar Pradesh Noida UP since 2017. He had worked as Associate Professor (Mechanical Engineering) in Glocal University, Saharanpur from 2014 to 2017. Prior to this, he was working as Assistant Professor (Sr. Grade) in PSG Institute of Advanced Studies, Coimbatore TN from 2013 to 2014. Dr. Rajeev Kumar Singh has worked in faculty position in Northern India Engineering College, Lucknow from 2000 to 2007. Apart from this, he has also worked in Nagpur Alloy Casting Limited, Nagpur MS and Crown Brass Pvt. Ltd., Bahadurgarh Distt. Jhajjar HR. Dr. Rajeev Kumar Singh has completed Ph.D. in Mechanical Engineering from Indian Institute of Technology, Kanpur in 2014; M. Tech. in Mechanical Engineering (Industrial Systems Engineering) from Kamla Nehru Institute of Technology, Sultanpur UP in 2007 and B.E. (Mechanical Engineering) from Yeshwant Rao Chavan College of Engineering, Nagpur in 1992. |Rakesh Phanden - Editor| is B.Tech. Mechanical Engineering, MTech. Integrated Product Design and Manufacturing from the Department of Mechanical Engineering, G.J.U. of Science and Technology, Hisar, India. He completed his PhD in Mechanical Engineering from the National Institute of Technology, Kurukshetra, India in 2012. He is currently working as Associate Professor in the Department of Mechanical Engineering at the Amity University, Uttar Pradesh, India. He has chaired many technical sessions in conferences and reviewed articles for many SCIs and Scopus indexed international journals of repute. He has organized various international conferences namely ICNDME 2014, FLAME 2020, FLUTE 2021, FLUTE 2023 and FLAME 2022 in the capacity of organizing secretary and convener. He is the sponsor of RSP Scholarship Program in which Rs. 50K is awarded to 5th standard students of his village every year on 15th August (Indian Independence Day). He has published 4 books and edited 5 special issue for a Scopus indexed journal. He is serving as an editorial board member for many journals. Currently, he is working as Guest Editor in 4 Special Issues on Industry 4.0, Sustainability Manufacturing, Lean Six Sigma to be published with Scopus indexed International Journals of Repute. He has 16 years of teaching experience at private and government institutes and universities in India and abroad. He has contributed more than 60 papers at the national/international levels including SCI journals namely International Journal of Computer Integrated Manufacturing, International Journal of Advanced Manufacturing Technology, Journal of Enhanced Heat Transfer, Journal of Manufacturing Technology and many more. His current areas of interest include thermal management of electronic devices, MEMS and Microfluidic Systems, Cyber-physical production systems, energy-aware modelling of systems, manufacturing systems, tool path optimization, production scheduling, integration of process planning and scheduling and product design and manufacturing. He has received International Travel Grant from DST to visit the USA and visited London, Singapore, Turkey, Dubai, and many African countries for various research work in collaboration with Amity University. |Basant Sikarwar - Editor| is a Postdoc from Iowa State University USA, Ph.D. from Indian Institute of Technology Kanpur, India, and M.Tech from Indian Institute of Technology Roorkee, India. His research experience is quite diversified, and he has been involved in experimental and simulation in many aspects of thermo-fluids research with an emphasis on phase change phenomena and the formation of interfaces. The subject is poised for growth because of several engineering applications such as the optimization of cooling techniques for thermal management of engineering systems, cooling of electronic equipment, heat pipes fabrication, water harvesting from moist air, and thermal energy storage. During his Ph.D., he developed a Finite Volume-based CFD solver and many students of his research groups at Amity university have been using this CFD solver for their research in thermal and fluid engineering. He published more than 40 SCI/Scopus-indexed journals and more than 100 Scopus-indexed conference publications. He completed one SERB-funded project and three funded projects from various funding agencies (BRNS and DST) are going on. He chaired many conferences. He is a member of the editorial board of many journals and book series, and he is a guest editor in the journal Enhanced Heat Transfer (Begell House Corp.). He is a consultant in many industries, and he has guided four Ph.D. Currently, four students are carrying out his research under his supervision. He has been heading the department of Mechanical engineering, Amity University Uttar Pradesh, since 2018. In addition, he is an Assistant Director of the Amity directorate of Engineering, Technology, and Innovation (ADETI). |J. Paulo Davim - Editor| received his Ph.D. degree in Mechanical Engineering in 1997, M.Sc. degree in Mechanical Engineering (materials and manufacturing processes) in 1991, Mechanical Engineering degree (5 years) in 1986, from the University of Porto (FEUP), the Aggregate title (Full Habilitation) from the University of Coimbra in 2005 and the D.Sc. from London Metropolitan University in 2013. He is Eur Ing by FEANI-Brussels and Senior Chartered Engineer by the Portuguese Institution of Engineers with an MBA and Specialist title in Engineering and Industrial Management. Currently, he is Professor at the Department of Mechanical Engineering of the University of Aveiro, Portugal. He has more than 30 years of teaching and research experience in Manufacturing, Materials, Mechanical and Industrial Engineering, with special emphasis in Machining & Tribology. He has also interest in Management, Engineering Education and Higher Education for Sustainability. He has guided large numbers of postdoc, Ph.D. and master’s students as well as coordinated & participated in several financed research projects. He has received several scientific awards. He has worked as evaluator of projects for international research agencies as well as examiner of Ph.D. thesis for many universities. He is the Editor in Chief of several international journals, Guest Editor of journals, books Editor, book Series Editor and Scientific Advisory for many international journals and conferences. Presently, he is an Editorial Board member of 25 international journals and acts as reviewer for more than 80 prestigious Web of Science journals. In addition, he has also published as editor (and co-editor) more than 100 books and as author (and co-author) more than 10 books, 80 book chapters and 400 articles in journals and conferences (more than 200 articles in journals indexed in Web of Science core collection/h-index 45+/6000+ citations and SCOPUS/h-index 53+/8500+ citations).
| Erscheint lt. Verlag | 13.6.2023 |
|---|---|
| Reihe/Serie | Advances in Mechatronics and Mechanical Engineering |
| Verlagsort | Hershey |
| Sprache | englisch |
| Maße | 216 x 279 mm |
| Themenwelt | Naturwissenschaften ► Physik / Astronomie ► Strömungsmechanik |
| Technik ► Maschinenbau | |
| ISBN-10 | 1-6684-6956-1 / 1668469561 |
| ISBN-13 | 978-1-6684-6956-9 / 9781668469569 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
