Advanced Functional Materials (eBook)

Proceedings of Chinese Materials Conference 2017

Yafang Han (Herausgeber)

eBook Download: PDF

2018 | 1st ed. 2018
XVI, 973 Seiten
Springer Singapore (Verlag)
978-981-13-0110-0 (ISBN)

Infos

This proceedings volume gathers selected papers presented at the Chinese Materials Conference 2017 (CMC2017), held in Yinchuan City, Ningxia, China, on July 06-12, 2017.

This book covers a wide range of metamaterials and multifunctional composites, multiferroic materials, amorphous and high-entropy alloys, advanced glass materials and devices, advanced optoelectronic and microelectronic materials, biomaterials, deformation behavior and flow units in metastable materials, advanced fibers and nano-composites, polymer materials, and nanoporous metal materials.

The Chinese Materials Conference (CMC) is the most important serial conference of the Chinese Materials Research Society (C-MRS) and has been held each year since the early 1990s. The 2017 installment included 37 Symposia covering four fields: Advances in energy and environmental materials; High performance structural materials; Fundamental research on materials; and Advanced functional materials. More than 5500 participants attended the congress, and the organizers received more than 700 technical papers. Based on the recommendations of symposium organizers and after peer reviewing, 490 papers have been included in the present proceedings, which showcase the latest original research results in the field of materials, achieved by more than 300 research groups at various universities and research institutes.

Inhalt

Preface 5
Contents 6
1 The Stress and Morphology Evolution of CZO Films Under Different Growth Temperature 16
Abstract 16
Introduction 16
Experimental Details 17
Results and Discussion 18
Conclusion 23
Acknowledgements 24
References 24
2 Tunable Dielectric Property of Fe3O4/SiO2 Meta-composite Fabricated by Magnetic-Field Assisted Self-assembly 25
Abstract 25
Introduction 26
Experiment 26
Results and Discussion 27
Conclusion 29
Acknowledgements 29
References 29
3 Synthesis, Magnetic and Electrochemical Properties of NiFe2O4-rGO Nanohybrids 31
Abstract 31
Introduction 31
Experimental Section 32
Results and Discussion 33
Conclusion 37
Acknowledgements 37
References 37
4 Insulating Technology Control of Soft Magnetic Composites 39
Abstract 39
Introduction 40
Experiment 40
Results and Discussion 41
Conclusion 45
Acknowledgements 45
References 45
5 Dielectric Properties of Cu/Epoxy Random Composites at Radio-Frequency Range 47
Abstract 47
Introduction 47
Experimental 48
Results and Discussions 49
Conclusions 52
Acknowledgements 52
References 52
6 Preparation and Photoelectric Property of Poly-3-Methylthiophene/Nano-TiO2 Composite 54
Abstract 54
Introduction 54
Experimental 55
Results and Discussion 56
FTIR Characterization 56
Fluorescent Spectroscopy 57
Conclusion 61
Acknowledgements 61
References 62
7 Preparation of Nickel and Manganese Oxides Composite via Co-precipitation Method and Its Electrochemical Properties 64
Abstract 64
Introduction 64
Experimental 65
Result and Discussion 66
Conclusions 68
Acknowledgements 68
References 69
8 Synthesis and Properties Research of Coin-Like ?-Fe2O3 Nanoparticles 70
Abstract 70
Introduction 70
Experimental Section 71
Results and Discussion 72
Conclusion 76
Acknowledgements 76
References 76
9 Preparation and Optical Properties of Self-assembled ZnO Lyche-like Aggregates 78
Abstract 78
Introduction 79
Experiments 79
Results and Discussion 80
Conclusion 85
Acknowledgements 85
References 85
10 Effects of Microwave Irradiation on Electricity of Graphene Oxide Films 87
Abstract 87
Introduction 88
Experiment 88
Results and Discussion 89
Summary 92
Funding 92
References 92
11 Microwave Absorbing Performance on Polymer-Derived SiCN Ceramics Doped with Rare Earth Oxides 94
Abstract 94
Introduction 95
Experimental 96
Results and Discussion 96
Conclusions 101
Acknowledgements 101
References 102
12 Preparation and Properties of Pressureless-Sintered Porous Si3N4 Ceramics 104
Abstract 104
Introduction 105
Experimental Procedure 105
Results and Discussion 106
Conclusions 110
Acknowledgements 110
References 110
13 In Situ Synthesis of ZrB2–SiC Composite Powders by Carbothermal Reduction Method 112
Abstract 112
Introduction 113
Experiment 113
Results and Discussion 114
Conclusion 117
Acknowledgements 118
References 118
14 Facile Synthesis of Mn3O4 Nanoparticles Decorated Graphene as Enhanced Performance Electrode for Supercapacitor 119
Abstract 119
Introduction 120
Experimental 120
Results and Discussion 121
Conclusions 126
Acknowledgements 127
References 127
15 Preparation and Properties of Interconnected NiS Nanoparticle Network with Amphiphilic Polymers 129
Abstract 129
Introduction 130
Experimental Details 131
Results and Discussion 133
Conclusions 136
Acknowledgements 136
References 136
16 Crystal Structure and Magnetic Properties of FePd/Si3N4 Composite Films 141
Abstract 141
Introduction 141
Experimental Details 142
Results and Discussion 143
Conclusions 146
Acknowledgements 146
References 147
17 Preparation of Low-Dimensional Carbon Nanomaterials and Its Improvement of Visible Light Activity 148
Abstract 148
Introduction 149
Experimental Details 150
Results and Discussion 152
Conclusions 154
Acknowledegements 154
References 155
18 Corrosion Resistance of Fe-Based Stainless Steel Composite Layer Prepared by TWIAW 159
Abstract 159
Introduction 159
Experimental Materials and Methods 160
Results 161
The Appearance of Composite Layer 161
The Microstructure of Composite Layer 163
DL-EPR Intergranular Corrosion Tests of Composite Layer 164
Pitting Corrosion Tests of Composite Layer 165
Discussion 167
Conclusions 169
Acknowledgements 169
References 169
19 Influence of Sintering Process on the Properties of Porous Ti2AlC 171
Abstract 171
Introduction 171
Experimental 172
Results and Discussion 173
Conclusions 177
Acknowledgements 177
References 177
20 Influences of La on Optical and Electric Properties of BiFeO3 Thin Films 179
Abstract 179
Introduction 180
Experimental 180
Results and Discussion 181
Summary 186
Acknowledgements 186
References 187
21 Effect of Mn-Doping on the Structure, Magnetic Properties of Fe17Gd2 Compound 189
Abstract 189
Introduction 189
Experiment 190
Results and Discussion 190
Conclusions 194
Acknowledgements 194
References 194
22 Microstructure and Electric Properties of (Sr1?xCax)3Sn2O7 Ceramics with Ruddlesden-Popper Structure 196
Abstract 196
Introduction 197
Experimental Details 197
Results and Discussion 198
Conclusion 202
Acknowledgements 203
References 203
23 Microstructural Regulation and Optical Performance of Bismuth Ferrite Nanowires by Precipitant 205
Abstract 205
Introduction 206
Experimental 206
Results and Discussion 207
Conclusions 210
Acknowledgements 210
References 210
24 Improvement of the Thermal Stability of Laminated Magnetoelectric (ME) Composites 212
Abstract 212
Introduction 212
Experimental Details 213
Results and Discussion 214
Conclusions 217
Acknowledgements 217
References 217
25 Mechanism of Preparing Laminar Composite Using Ti-Based Amorphous Alloy 219
Abstract 219
Introduction 220
Preparation of Amorphous Laminated Composites 220
Phase Composition Analysis of Amorphous Self-assembled Laminated Composites 220
Analysis of Diffusion Mechanism 223
Conclusion 227
References 227
26 Effect of Zr and Cu on Mechanical Properties, Glass Forming Ability and Thermal Stability of Zr63.68Cu16.2 Ni10.12 Al10 Amorphous Alloy 229
Abstract 229
Introduction 230
Experimental Raw Materials and Methods 230
Results and Analysis 231
Conclusion 240
Acknowledgements 241
References 241
27 Manifestation of Dynamic Anomaly in Metallic Glass-Forming Liquids by Their Crystallization Processes 243
Abstract 243
Introduction 244
Experimental Procedures 245
Results 245
Discussion 251
Summary 253
Acknowledgements 253
References 253
28 Effects of Iron on Microstructure and Properties of CoCrFexNi Multi-principal Element Alloys 256
Abstract 256
Introduction 257
Experimental Procedures 257
Results and Discussion 258
Conclusions 260
Acknowledgements 260
References 261
29 Effects of La and Be on Glass-Forming Ability of Al84Co8Y8 Metallic Glass 262
Abstract 262
Introduction 263
Experiments 263
Results and Discussion 264
Summary 268
Acknowledgements 268
References 268
30 Effect of Si and Y Addition on Glass Transition Kinetics of ZrCu Based Bulk Metallic Glass 270
Abstract 270
Introduction 270
Experimental Details 271
Results and Discussion 271
Conclusions 275
Acknowledgements 276
References 276
31 Effects of Pre-compression on the Microstructure and Corrosion Resistance of Cu50Zr50 Bulk Metallic Glass Matrix Composites 278
Abstract 278
Introduction 278
Experimental 279
Results and Discussion 280
Conclusions 284
Acknowledgements 285
References 285
32 Effect of Annealing Temperature of Fe78Si9B13 Amorphous Ribbons for Activation of Persulfate on Azo Dye Degradation 287
Abstract 287
Introduction 287
Experimental 288
Results and Discussions 289
Conclusion 293
Acknowledgements 293
References 294
33 Microstructures and Mechanical Properties of NixCoCrFeMo0.1 Multi-component Alloys 295
Abstract 295
Introduction 295
Experimental Procedures 296
Results and Discussion 297
Conclusions 301
Acknowledgements 301
References 301
34 Influences of Impurity Alloying on Thermal Stability and Mechanical Properties of Zr50Ti4Y1Al10Cu25Ni7Co2Fe1 Bulk Metallic Glass 303
Abstract 303
Introduction 304
Experimental 304
Results and Discussion 305
Summary 309
References 309
35 Corrosion Resistance of Fe-Based Bulk Amorphous Alloy with Sulfide Inclusion 311
Abstract 311
Introduction 311
Experimental 312
Results and Discussions 313
Conclusions 319
Acknowledgements 319
References 319
36 Synthesis of In-Suit Ti46.8Zr19.5Nb11.7Cu5Be14.5Ag2.5 Amorphous Composite Materials with High Tensile Ductility 321
Abstract 321
Introduction 322
Experiment 322
Results and Discussions 323
Conclusions 327
Acknowledgements 327
References 327
37 Effect of Argon Filling Ratio on Heat Transfer Coefficient of Double-Glazing 329
Abstract 329
Introduction 329
Double-Glazed Sample Preparation 331
Results and Discussion 333
Conclusion 337
References 337
38 Hydrothermal Synthesis and Characterization of Cs0.32WO3 Rod-like Nanoparticles with Excellent Near-Infrared Shielding Property 339
Abstract 339
Introduction 340
Experimental 341
Results and Discussion 342
Conclusion 346
Acknowledgements 346
References 346
39 High Order Laterally-Coupled Distributed-Feedback GaSb-Based Diode Lasers at 1.9 ?m Wavelength 348
Abstract 348
Introduction 349
LC-DFB Device Fabrication 349
Measurements and Analysis 350
Conclusions 353
References 353
40 GaSb-Based QWs 2 ?m High Power Laser Diode 355
Abstract 355
Introduction 356
Experiment 356
Results and Analysis 357
Summary 360
Found Program 360
References 360
41 Thermal Stability of Er2O3–Al2O3 Thin Films Grown on Si Substrates 362
Abstract 362
Introduction 362
Experiment 363
Results and Discussion 363
Summary 368
Acknowledgements 368
References 368
42 (GaSb)0.5–Ge1.6Te Alloys for High-Temperature Phase Change Memory Applications 370
Abstract 370
Introduction 370
Experiments 371
Results and Discussion 371
Conclusions 375
Acknowledgements 375
References 376
43 A Stretchable and Flexible Strain Sensor Based on Graphene Sponge 377
Abstract 377
Introduction 378
Experimental Section 379
Results and Discussion 379
Summary 383
Acknowledgements 383
References 383
44 Self-healable Silver Nanowire-Based Composite for Elastic Strain Sensor 386
Abstract 386
Introduction 387
Experiment 388
Results and Discussions 389
Conclusions 393
Acknowledgements 393
References 393
45 Morphology Evolution of Monolayer MoS2 Flakes with Seed Promotor Grown by CVD 395
Abstract 395
Introduction 396
Experimental 396
Results and Discussion 397
Conclusions 400
Acknowledgements 400
References 400
46 Automatic Switching System of Voltage Pulse and Current Pulse Test in Phase Change Memory Devices 402
Abstract 402
Introduction 402
Experimental Design and Setup 403
Results and Discussion 407
Conclusions 409
Acknowledgements 409
References 409
47 Synthesis and Characterization of New Block Copolymers for Direct Self-assembly 411
Abstract 411
Introduction 412
Experimental 413
Results and Discussion 414
Conclusion 417
Acknowledgements 418
References 418
48 In Vitro Cytocompatibility and Osteogenic Potential of Biodegradable Mg–Sr Alloys 419
Abstract 419
Introduction 420
Materials and Methods 421
Results and Discussions 424
Conclusion 429
Acknowledgements 429
References 430
49 Fabrication of Urethral Tissue Engineering Scaffolds Based on Multi-scale Structure of Bacterial Cellulose Matrix Materials: A Preliminary Study 431
Abstract 431
Introduction 432
Materials and Methods 432
Results and Discussion 434
Conclusions 438
Acknowledgements 438
References 438
50 Peripheral Nerve Repair with Electrospinning Composite Conduit 440
Abstract 440
Introduction 441
Experimental Section 443
Results 446
Surgical Procedure 448
Lead Citrate Staining 450
Discussion 452
Conclusions 453
Acknowledgements 453
References 453
51 Preparation and Characterization of Mg–Zn–Al LDHs Nanoplates via In Situ Growth on Mg–Zn–Zr–Sr Alloy 455
Abstract 455
Introduction 456
Materials and Methods 457
Results and Discussion 458
Conclusions 466
Acknowledgements 466
References 466
52 Microstructure, Mechanical Properties and Corrosion Behavior of Mg–Zn–Zr Alloys with Different Compositions 469
Abstract 469
Introduction 470
Experiment 470
Results and Discussion 471
Conclusion 476
Acknowledgements 476
References 476
53 Preparation and Characterization of Polymer Nanoparticles with Multiple Response 478
Abstract 478
Introduction 479
Experiments 479
Synthesis of Multi-response Polymers 480
Preparation of Nanoparticles 481
Performance Test and Characterization of the Sample 481
Results and Discussion 482
Conclusions 488
References 488
54 High-Strength FeCrMo0.2(AlNi)0.5 High Entropy Alloy Strengthened by B2 Precipitate 489
Abstract 489
Introduction 489
Methodology 490
Results and Discussion 492
Summary 495
Acknowledgements 495
References 495
55 Compressive Strength of Al2O3 Composites Reinforced with Three-Dimensional Carbon Fiber Preform 497
Abstract 497
Introduction 497
Experimental Procedure 498
Results and Discussion 499
Summary 502
Acknowledgements 502
References 502
56 Influence of Compaction Pressure on the Properties of Silica Ceramic Cores 504
Abstract 504
Introduction 505
Experimental Procedures 505
Results and Discussion 506
Conclusion 509
Acknowledgements 509
References 509
57 Performances of Multiphase Ceramics of SiC and Praseodymium Aluminates 511
Abstract 511
Introduction 512
Experimental 512
Results and Discussion 513
Conclusions 519
Acknowledgements 519
References 519
58 Influence of SPS Sintering Temperature on Properties of ZrB2–SiC–Cr3C2 Ceramic 521
Abstract 521
Introduction 521
Experiment 522
Results and Discussions 523
Summary 527
References 527
59 Effect of Different Crystallization Temperature on Dielectric Properties of BaO–SrO–PbO–TiO2–SiO2–Nb2O5 Glass-Ceramic Composites 529
Abstract 529
Introduction 530
Experimental Procedures 531
Results and Discussion 531
Conclusions 535
Acknowledgements 535
References 535
60 Densification of Tantalum Carbide Ceramics with 1–10 mol% LaB6 537
Abstract 537
Introduction 537
Experimental 538
Results and Discussion 539
Conclusions 542
Acknowledgements 542
References 542
61 Effects of Fine Composite Powders Addition on Properties of Corundum-Spinel Refractory Castables 543
Abstract 543
Introduction 543
Materials and Methods 544
Results and Discussion 546
Conclusion 549
Acknowledgements 549
References 549
62 Preparation and Bench Test of SiC Honeycomb Ceramics with Macroporous Walls 551
Abstract 551
Introduction 551
Technological Process 553
Performance Testing 557
Conclusion 557
References 557
63 Effects of Annealing on Properties of PLZT (8/68/32) Electrically Controlled Light Scattering Ceramics 558
Abstract 558
Introduction 559
Experimental Procedure 559
Results and Discussions 560
Summary 564
Acknowledgements 564
References 564
64 Luminescence Properties of Lu3+-Doped YAG Prepared by a Solid-State Reaction Method 565
Abstract 565
Introduction 566
Experimental 566
Result and Discussions 567
Conclusions 571
Acknowledgements 571
References 572
65 Effects of Sintering Temperature on Microstructure, Electric Properties of Ba0.7Sr0.3TiO3 Ceramics 573
Abstract 573
Introduction 574
Experiment Details 574
Results and Discussions 575
Summary 583
Acknowledgements 583
References 583
66 Effect of Fused Silica Fiber on the Shrinkage and Properties of Silica Based Ceramic Core 585
Abstract 585
Introduction 585
Experiment Procedure 586
Results and Discussion 588
Sintering and as-Cast Shrinkage 588
Physical Properties 590
Conclusions 593
References 593
67 Temperature Dependence of Ga3+-Doped CaS:Eu2+ Phosphors 594
Abstract 594
Introduction 595
Experimental 595
Results and Discussion 596
Conclusions 599
Acknowledgements 599
References 599
68 Infrared Emission Properties of Cr3+-Doped NiAl2O4 Spinel Ceramics 601
Abstract 601
Introduction 602
Experimental 602
Results and Discussion 603
Summary 607
Acknowledgements 607
References 607
69 Effect of Curing Temperature on the Properties of Quartz Fiber Felt Reinforced Fused Silica Densified with Simethicone 609
Abstract 609
Introduction 609
Experimental Procedures 610
Results and Discussion 611
Summary 614
References 615
70 Preparation of Al2O3–Y2O3 Composite Coatings on Silica-Based Ceramic Core Surface 616
Abstract 616
Introduction 617
Experimental 618
Results and Discussion 618
Summary 624
References 624
71 Preparation of LaPO4 Nanoparticles by Coprecipitation Method 626
Abstract 626
Introduction 627
Experimental Procedure 627
Results and Discussion 628
Summary 632
Acknowledgements 632
References 632
72 Preparation of 3Y-TZP Nanoceramics by a Modified Two-Step Sintering with Ultrahigh Heating and Cooling Rates 633
Abstract 633
Introduction 633
Experimental Procedure 634
Results and Discussion 636
Summary 640
Acknowledgements 640
References 640
73 Phase Transformation Mechanism of Self-reinforced Y-?-SiAlON Ceramic Tool Material Manipulated by Two-Step Sintering 642
Abstract 642
Introduction 643
Experimental Procedure 644
Results and Discussion 645
Conclusions 652
Acknowledgements 652
References 652
74 Preparation and Characterization of Electro-responsive Graphene Oxide/Hydrolyzed Polyacrylamide/Sodium Alginate Hydrogel Fiber 654
Abstract 654
Introduction 654
Experimental 655
Result and Discussion 657
Conclusion 660
References 661
75 Preparation and Study of Silicone Polyurethane Low Friction Coating 662
Abstract 662
Introduction 663
Experimental 663
Results and Discussion 664
Conclusions 668
References 668
76 Preparation of Superhydrophobic PVDF/P(HEMA-MMA-SMA)/SiO2 Composite Membranes by Electrospinning 670
Abstract 670
Introduction 670
Experimental 671
Results and Discussion 673
Conclusions 677
References 677
77 Uniformly Polyaniline-decorated Carbon Nanofibers as Active Materials for Improved Supercapacitor Properties 679
Abstract 679
Introduction 680
Experimental 681
Results and Discussion 682
Conclusions 687
References 687
78 Rapid Deposition of Al2O3/SiO2 Composite Coating on Carbon Fiber Fabric 689
Abstract 689
Introduction 689
Experimental 690
Results and Discussion 691
Conclusions 693
Acknowledgements 693
References 693
79 Effect of Treatment Temperature on the Structure and Properties of Braiding Reinforced Thermoplastic Polyurethane Medical Hollow Fiber Tube for Invasive Medical Devices 695
Abstract 695
Introduction 696
Experimental 697
Characterizations 697
Result and Discussion 698
Conclusion 701
Acknowledgements 701
References 701
80 Preparation of Core-Shell ZrO2@SiO2 Nanoparticles and Its Effect on Properties of Composites 702
Abstract 702
Introduction 703
Materials and Methods 703
Characterization 704
Results and Discussion 705
Conclusion 709
Acknowledgements 709
References 709
81 Investigation of Tensile Property of Thin Ply Composite Laminate with Open-Hole Assisted by Acoustic Emission Technology 710
Abstract 710
Introduction 711
Experimental 712
Results and Discussion 714
Optical Micrograph 714
Tensile Property of the Laminates with Open-Hole 714
Ultimate Tensile Strength 714
Onset Damage Stress 716
Conclusions 718
Acknowledgements 718
References 718
82 Effects of Purification on the Structure and Properties of Hardwood Kraft Lignin 720
Abstract 720
Introduction 720
Materials and Methods 722
Results and Discussion 723
Conclusions 730
Acknowledgements 730
References 730
83 Preparation and Gas Sensing Property of PEDOT/Silica Aerogel Fibers 732
Abstract 732
Introduction 733
Introduction 734
Results and Discussions 736
Summary 740
Acknowledgements 741
References 742
84 A Novel Janus Thermosensitive Hydrogel with Bidirectional Shape Changing Property 744
Abstract 744
Introduction 744
Materials and Methods 745
Characterization 747
Results and Discussion 748
Conclusions 752
Acknowledgements 752
References 752
85 Surface Modification of Quartz Fiber by Aqueous Plasma Electrolysis 754
Abstract 754
Introduction 754
Experimental 755
Results and Discussion 756
Conclusions 758
References 759
86 GO/DNA/Au/PANi Nanocomposite with High Photoconductive Responses to Visible Light and NIR 760
Abstract 760
Introduction 761
Experimental Details 762
Results and Discussion 763
Conclusions 767
Acknowledgements 767
References 767
87 Effect of Boron Content on Structure and High Thermal Stability of Polyborosilazane Precursor 773
Abstract 773
Introduction 773
Experimental 774
Results and Discussion 775
Conclusion 779
Acknowledgements 780
References 780
88 Dispersion of Graphene Oxide in Polyvinylidene Difluoride and Its Improvement of Photoresponse Properties of Nanocomposite 782
Abstract 782
Introduction 783
Experimental Details 785
Results and Discussion 786
Conclusions 789
Acknowledgements 789
References 790
89 Antimony Doped Tin Oxide Infrared Shielding Films for Cooling Silicon Solar Cells 793
Abstract 793
Introduction 794
Experimental Section 795
Result and Discussion 796
Summary 804
Acknowledgements 804
References 804
90 Preparation and Properties of Cool-Feeling PA6 Fiber 806
Abstract 806
Introduction 807
Experimental Section 807
Results and Discussion 808
Conclusions 814
Acknowledgements 814
References 814
91 Dispersion of Single-Walled Carbon Nanotubes in Organic Solvents DMAC 816
Abstract 816
Introduction 816
Experimental Part 818
Dispersion Experiments with Different Chemical Treatments 818
Results and Discussion 819
Effect of Different Methods of Treatment on Dispersion of Carbon Nanotubes in DMAC Solvent 819
As Effect of Dispersant and Polyacrylonitrile on Dispersion of Carbon Nanotubes in DMAC Solvent 821
Effect of Different Chemical Treatment of Carbon Nanotubes on It’s Dispersion in DMAC Solvent 823
Conclusions 826
References 826
92 Preparation and Characterization of TPS/PBAT/Tourmaline Biodegradable Composite Films 828
Abstract 828
Introduction 828
Experimental 829
Materials 829
Results and Discussion 831
Characterization of TPS/PBAT Film 831
Characterization of TPS/PBAT/Tourmaline Film 832
Conclusion 834
Acknowledgements 834
References 834
93 Fire Performance Analysis of PVC and Cabtyre Cables Based upon the Ignition Characteristics and Fire Growth Indexes 836
Abstract 836
Introduction 837
Materials and Methods 837
Results and Discussions 838
Summary 843
Acknowledgements 843
References 843
94 Loading and Controlled Releasing of Anti-cancer Drug Bortezomib by Glucose-Containing Diblock Copolymer 845
Abstract 845
Introduction 846
Experimental Section 847
Results and Discussion 848
Conclusions 852
Acknowledgements 852
References 852
95 Trimethylisophthtalodinitrile Oxide as a Room-Temperature Curing Agent for Curing HTPB 855
Abstract 855
Introduction 855
Materials and Methods 856
Characterization 857
Results and Discussion 858
Conclusions 861
Acknowledgements 862
References 862
96 Effect of Coagulants on Phase Morphology and Property of Cellulose/Silk Fibroin Blend Fiber 864
Abstract 864
Introduction 864
Experiment 865
Measurements 866
Results and Discussion 867
Conclusion 871
Acknowledgements 871
References 871
97 Insulation Failure of Class 1E Cable for Nuclear Power Station Under Fire Heat Radiation 873
Abstract 873
Introduction 873
Experimental Setup 874
Result and Analysis 875
Conclusion 879
Acknowledgements 880
References 880
98 Insulation Failure Mechanism of Cable in Fire Environment 881
Abstract 881
Introduction 881
Thermogravimetric Experiment 882
Experimental Results and Discussion 883
Analysis of Relationship Between Cable Insulation Resistance and Temperature 886
Conclusion 889
Acknowledgements 889
References 889
99 Microstructure Evolution of Nanoporous Copper Fabricated by Electrochemical Dealloying Mn–Cu Alloy 890
Abstract 890
Introduction 891
Experimental 892
Results and Discussion 892
Summary 895
References 895
100 CeO2 Nanorod-Supported Transition Metal Catalysts Prepared by Dealloying for CO Oxidation 898
Abstract 898
Introduction 898
Experimental Methods and Characterization 900
Results and Discussion 900
Conclusion 906
Acknowledgements 907
References 907
101 Effect of Corrosion Potential on the Structure and Properties of Nanoporous Nickel 908
Abstract 908
Introduction 909
Experiment 910
Result and Analysis 910
Conclusion 916
Acknowledgements 916
References 916
102 Effect of Two-Step Anodization on Structure of TiO2 Nanotube Arrays 918
Abstract 918
Introduction 919
Experimental Details 919
Results and Discussions 920
Conclusions 926
References 926
103 The Influence Factor of Silicon Carbide Ceramic Sintering 927
Abstract 927
Introduction 928
Experimental Procedure 928
Results and Discussion 929
The Influence of Sintering Curve 929
The Influence of Pressure and Green Body Density 930
The Influence of Particle Size 932
Conclusion 933
References 933
104 Effect of Functional Additives on Performance of Internal Combustion Engine Lubricating Oil 934
Abstract 934
Introduction 935
Experimental Methods 936
Results and Discussion 937
Conclusion 941
References 942

Produkt-Details

• Erscheint lt. Verlag: 19.4.2018
• Zusatzinfo: XVI, 973 p. 595 illus., 404 illus. in color.
• Verlagsort: Singapore
• Sprache: englisch
• Themenwelt: Naturwissenschaften ► Chemie ► Organische Chemie
• Themenwelt: Technik ► Elektrotechnik / Energietechnik
• Themenwelt: Technik ► Maschinenbau
• Themenwelt: Wirtschaft
• Schlagworte: Advanced Glass Materials and Devices • Advanced Optoelectronic and Microelectronic Materials • Amorphous and High-entropy Alloys • Chinese Materials Conference • CMC 2017 • Metamaterials and Multifunctional Composites • Polymer materials
• ISBN-10: 981-13-0110-7 / 9811301107
• ISBN-13: 978-981-13-0110-0 / 9789811301100