Advanced Manufacturing and Industrial Engineering
Trans Tech Publications Ltd (Verlag)
978-3-03835-207-5 (ISBN)
Collection of selected, peer reviewed papers from the 4th International Conference on Advanced Engineering Materials and Technology (AEMT 2014), June 14-15, 2014, Xiamen, China.
The 238 papers are grouped as follows:
Chapter 1: Structural Dynamic Analysis, Optimization and Control,
Chapter 2: Oil, Gas and Mineral Exploration Engineering,
Chapter 3: Heat, Fluid and Flow Engineering, Thermodynamics Manufacturing Applications,
Chapter 4: Innovative Mechanical Design and Systems Dynamics,
Chapter 5: CAD / CAM / CAE,
Chapter 6: Advanced Manufacturing and Industry Engineering, Manufacturing Production, Operations, Quality and Control,
Chapter 7: Green Supply Chain and the Internet of Things Development,
Chapter 8: Mechatronics, Industrial Robots, Automation and Control Technologies,
Chapter 9: Machine Vision Technology, Image and Video Processing,
Chapter 10: Measurement Technology, Instruments and Sensors, Detection Technologies and Methodologies,
Chapter 11: Embedded Systems and Modern Electronic, Circuit Technology, Electric, Electromagnetic and Power Engineering Applications,
Chapter 12: Computer Applications and Mathematical Modeling, Intelligent Algorithms and Optimization,
Chapter 13: Engineering Education and Engineering Management
Preface and Conference Organization
Chapter 1: Structural Dynamic Analysis, Optimization and Control
Analysis and Optimization of Bracket of Slag Well Based on ABAQUS
Deformation and Stress Analysis of Flapping Wing Aerial Vehicles Based on Composites Model
Numerical Investigation on the Fatigue Behavior of the Multi-Planar Tubular DX-Joint under Combined Loads
Research on the Effect of Seasonal Environmental Loads on Bohai Bay Offshore Platform
Research on Transonic Wind Tunnel Flutter Test for a Wing Model
Modeling and Analysis of Wire Rope in the Drilling Device Using ANCF Method
Review on Damage Identification and Diagnosis Research of Civil Engineering Structure
Structure Design of Car Overpass in the Urban Rail Construction
A Three-Dimensional Distribution Model of Pressure on Inner Surface of Elbow Pipe Based on FLUENT
An Agricultural Vehicle Frame Load Characteristic Agricultural Experimental Research
Analysis of Seismic Isolation Device for Earthquake Resistant Building Structure Reinforcement
Rise Steel Wind-Induced Response Analysis
Different Types Cross Section Columns Combination of Multi-Layer Steel Frames Optimum Design Analysis
Strength Calculation Based on Contact Nonlinear Analysis of Coupler Bolt with Three Methods
Chapter 2: Oil, Gas and Mineral Exploration Engineering
Analysis on Water Abundance of Loose Aquifer and Quality Evaluation of Overburden Strata during Mining under Loose Aquifer
Coal Mine Land Reclamation Measures — Open-Pit Coal Mine of Baofa Coal Co., LTD
Research on the Water Absorbent Laws of Injection Wells Formation
Study of Experiments on Dosage of the Flocculating Agent of Pure Minerals for the Overflow of Concentrate of the Before Mineral Processing of Strong Magnetism
Technical Research of Composite Blockage Remover Technology in Dongrengou Oil Region of Dingbian Oilfield
The Application in Calculation of the Horizontal Wells’ True Thicknesses – An Example of Penglaiba Formation in the Northern Tarim Basin
The Evaluation of Potential of Shale Oil Resources in K1qn1 Formation of Southern Songliao Basin
Water Absorption Technology of Gas Drilling
Application of Tracer Test in Survey of Hydraulic Connection between Water Gushing and Fracture Water in Karst Tunnel – Taking Zhongjiashan as an Example
Research on the Characteristics of Electromagnetic Radiation in the Impact Damage Process of Coal
Chapter 3: Heat, Fluid and Flow Engineering, Thermodynamics Manufacturing Applications
Analysis and Numerical Simulation of Flow Field in Centrifugal Pump
The System of Water Pressure Detection
Analysis and Troubleshooting of the Hydraulic System about Bicycle Assembly Line
Dynamic Characteristics Investigation on Hydraulic System of Power-Slipway for Combined Machine Tools
Effects of Gas Nucleus on Cavitation Inception and Bubble Characteristics inside V-Throttling Groove
Experimental Study on Novel High Density and High Temperature Tolerant Fracturing Fluid
Hydraulic Circulation Test and CFD Analysis of Prestressed Cementing Unit Earth Anchor
Numerical Analysis of Roll Waves Generation on Non-Newtonian Fluids Flowing down an Inclined Plane
The Influence of Thermal Resistances and Nonperfect Regenerative Losses on the Performance of a Ferroelectric Ericsson Refrigerator
Spray Cooling Rate Model of Heavy Cylinder Rolling
Stress State of a Thick-Walled Cylindrical Shell under the Combined Action of Radiation and Temperature Field
Numerical Simulation on Moisture Influence to MSW Combustion
Combustion Characteristic Parameter Testing and Caculating of Single-Base Propellant
Numerical Simulation and Experimental Research of Blade Erosion in Particulate Gas Turbine
The Current Status of Development and Applications of Wave-Heated Discharge Plasma Sources
Hazard Evaluation of Carbon Steel Water Tube Boiler under Explosion Behavior
Simulation of Geometry Parameters Optimization of Diesel Engine Combustion Chamber on Passenger Vehicle
Chapter 4: Innovative Mechanical Design and Systems Dynamics
Design of Sand-Blasting Lifting Equipment
Design of VLM20-FMC-Type Inverted Spindle CNC Turning-Milling Compound Flexible Machining Cell
Design and Simulation of the Biomimetic Flexible Fish Fin Propeller on Submarine
Design of Small Multi-Function Chassis Brake Device
Research on the Multifunctional Rotary Bowl Making Machine
Design and Application on Multi-Function Construction Platform of Boom Type Road-Header
Key Components Design of Vertical Shaft Impact Crusher Based on NX
Robust Design for Steering Mechanism by Using Points of Monomial Cubature Rules
Analysis of Harmonic Gear Drive Efficiency Based on the 3D Simplified Model
Simulation Research on Soft-Starting for AMT Driving Belt Conveyor
Analysis on Vehicle Vibration Performance Based on Yaw Rate Response Characteristics
Dynamics Analysis of 3-PPR Planar Parallel Mechanism Including Friction
Impact of Lateral Motion of Wheelset on Wheel-Rail Contact Creepage
Impact Study of Mass Eccentricity of Sniper Rifle Bullet on Initial Disturbance
Modeling and Solving of Non-Linear Vibration Model of the Multi-Clearance and Bend and Torsion Coupled Gear-Driven System
Periodic-Doubling and Hopf Bifurcations of a Two-Degree-of-Freedom System with Elastic Constraints and Clearances
Research on Synchronization Performance of Lock-Pin Synchronizer
The Analysis of Amphibious Vehicle Handling Stability Based on ADAMS/Car
Dynamic Analysis on Flexible Cable-Driven Parallel Mechanism
The Study on Control and Riding Comfort of Air Suspension
Analysis of the Blade Structure on the Influence of the Particle Movement
Analysis on Kinematics between Piston and Cylinder Block in Swash-Plate Axial Piston Motor
Gear-Drive Parametric Design with Femap Express Stress Analysis
A Prevalent Error in Optimization Design of Helical Springs
Chapter 5: CAD / CAM / CAE
The Application of UG Finite Element Analysis on Dynamic Load Analysis of Cable Pendulum Bar
Kinematics Analysis and Simulation of a Shaper Mechanism Based on UG NX8.0
Research on Real-Time Plotting of High-Speed CNC Laser Cutting
The Construction of Sweep Surface Based on Precision Control
A New Method of Data Smoothing for Scan-Line Point Cloud in Reverse Engineering
Chapter 6: Advanced Manufacturing and Industry Engineering, Manufacturing Production, Operations, Quality and Control
Quality Management and Control of Mold Manufacturing Products Based on SPC
Study on Quality Control Method in Multi-Specification and Small-Batch Production
The Third Party Inspection Research of Valves for Liquefied Natural Gas Project
Implementation of Collaborative Process Planning System
Implementation of Synchronous Mechanism in Collaborative Process Planning
Pareto Chart Based on Fuzzy-PPI and its Application in Analysis on Quality Data of Equipment Maintenance
Development Model of Engineering Manufacturing and its Application
Quality Monitoring and Control of the Publicity Translation System Based on Cognitive Mechanism
Optimizing the Flow Velocity of the Assembly Line: A Cognitive Neuroscience Perspective
Predicting Tool Point FRF by RCSA in High Speed Milling
Parameter Optimization Method of Screw Axis with Variable Diameters and Different Pitches Based on PSO-BP NN
Genetic Algorithms for the Optimum Design of Multi-Point Gear-Meshing Flexible Drive
Reliability Design and Test of the Vehicle Electronic Equipment
The Research on the Checking Experiment Scheme of the Digital Simulation of the Toroidal Worm and the Manufacture of the Tested Worm
The Research on the Digital Simulation Software of the Planer Double-Enveloping Toroidal Worm
Application of Improved Genetic Algorithm in Optimum Configuration of Viscous Dampers in Tall Buildings
A Simulation and Optimization Study of Assemble Production Line
Optimal Scheduling of Multiple-Line Collaborative Manufacturing Based on Teaching-Learning-Based Optimization Algorithm
Single Machine Due Window Assignment and Scheduling with an Optional Maintenance Activity
Based on the State of Emergency Safety Assessment Method of Airlines Dispatch Operation
Dynamic Game Algorithm for Allocation Model of Human Resource Based on Multi-Projects
Selection Algorithm of Developing New Products in Complex Environmental Constraints
Spare-Part Optimization Modeling for a Mixed Multi-Echelon Inventory System
The Research and Application on Location of Distribution Center Based on Grey Theory and AHP
The Study of Reliable Model on the Maximal Forecast Time of Complicatedly Mechanical System
Application of DEA Model Based on FCE in the Cigarette Packaging System Mode Evaluation
Prediction of Electric Vehicle Sales Based on Grey Linear Regression Model
Reliability Analysis for One-Shot Product with Weibull Lifetime Components ─ An Empirical Study
Research on the Application of Activity-Based Costing Based on the Concept of the New Accounting Standards
The Study of Eliminate Companies Seven Wastes of Enterprises Based on the Theory of Industrial Engineering and Lean Production
Maintainability Modeling of NC Machine Tools Based on Repair Time
Single Machine Scheduling and Due Date Assignment with Past-Sequence-Dependent Delivery Times and Position-Dependent Processing Times
The Reliability Analysis of Cut Angle Fuzzy of Chimney Demolished by Controlled Blasting
Chapter 7: Green Supply Chain and the Internet of Things Development
Research on Influencing Factors of Knowledge Sharing in Pharmaceutical Supply Chain Based on ISM
Reverse Logistics Network Design for End of Life Computer in Malaysia
A New Approach to the Weights of Predict Traffic Flow Based on Internet of Things Technology
A Study on Performance Evaluation of Green Supply Chain Management Based on DEA
Adaptive Mobility Management Framework Using Active Proxy Node
Application of the Internet of Things Technology in Food Safety Monitoring and Controlling System
System Feedback Structure Analysis about Implementation of Green Supply Chain Management
The China’s Railway Diversification Management Strategy under Modern Logistics Environment
Design and Analysis of a New Mutual Authentication Protocol for RFID
Study on the Strategy of Logistics Industry Development in Gansu Province
Study on the Alignment of New Product Development and Supply Chain
Study on Collaborative R&D Strategy between Manufacturer and Supplier Based on Uncertain Demand and Exchange Rate
Chapter 8: Mechatronics, Industrial Robots, Automation and Control Technologies
The Study of Control Strategy for Sensor-Less PMSM
AUV’s Executer Fault-Tolerant Control Based on ADRC
Design of the Control System for Fully Automatic Steel-Tube Molding Machine
Electromagnetic Mixing Laser Guided Mode and Laser Site Positioning
Chapter 8: Mechatronics, Industrial Robots, Automation and Control Technologies
Non-Linear Path-Following Control of Micro-AUV
Application Study of the Automotive Active Collision Safety System
Dynamic Modeling and Model-Based Force Control of a 3-DOF Translational Parallel Robot
Robot Teleoperation System Based on Web and Kinect
The Application of Automatic Cutting Technology to Medium Thick Coal Seam in Shendong Mine
The Design of Gluing Robot Control System Based on CAN Bus
The Device for Control Objects Identification: Getting Temporal Dynamic Characteristics
Study on High-Speed Switch Shifting Solenoid Current Control Technology for Automatic Transmission
The Design of Plate Mills Hydraulic Lubricating and Monitoring System
Design of Human-Machine Interaction for Motor Controller of Vehicle
Analysis of Degree of Freedom of 4-SPxyzS/S Parallel Mechanism of the Imitation of Human Wrist
Application of Database Technology in Fault Extract for Shipboard Power System
The Design of Automatic Control Temperature System for Greenhouse
Control System Design for Continuous Grinding Machine for Working Stones
Design and Research on the Safety Control System of a Bus
Research of Paddle Wave-Maker Control System Based on Jonswap Spectrum
New Method of Knowledge Acquisition of Aid Decision-Making for Missile-Launching
Research on Application of Fuzzy PID Control Based on PLC in Hot Press Control System
Design and Realization of Monitoring System for Scheelite Alkali Autoclave Reactor
Development of Test Bench for Durability of Ignition Coil Based on Labview
Study on Tobacco Flue-Curing Process for Curing Barn which Temperature and Humidity was Auto-Controlled
Queue Delay Model and Simulation for TTCAN
Switching Control Design for Switched Fuzzy Discrete-Time Systems
R&D of Visualization Control System for Differential Reactor
Track-Hunting Intelligent Car Based on Linear CCD Sensor Using Fuzzy Controller
The System Design of Wireless Video Transmission Based on PTZ Control
The Energy Management Strategy of Photovoltaic Energy Storage System
Study on Treatment of Wastewater System Based on ARM
Chapter 9: Machine Vision Technology, Image and Video Processing
Restoration of Motion Blurred Image Based on PSO Combine Wiener Filter in Ship Imaging System
A Detecting System on Defect Area of the Strip Steel’s Surface
Characteristics Detection Method for Material Surface Based on Polarization Vision Information
Review on Application of Near-Infrared Spectroscopy Identification Technology in Sorting Impurities from Waste Paper
Researches on Segmentation of Overlapped Convex Targets
Scale Distorted Target Recognition Based on Machine Vision
Vector Quantization by Minimizing Kullback-Leibler Divergence between the Class Label Distributions over Quantization Input and Output
An Image Quality Assessment Approach Based on Saliency Map in Space Domain
Research on Surface Defect Detection Technique of Rolling Element Based on Computer Vision
A Low Cost Scheme of Scene Depth Map for Stereoscopic Video Streaming Using Single Kinect Sensing
The Study and Experiment of ERT Imaging System
Model Optimization and Testing on Real-Time Video Moving Target Detection
Research on Intelligent Image Watermarking Schemes Based on Optimization Algorithm
Study on Reconstruction Techniques of Landscape Image
Chapter 10: Measurement Technology, Instruments and Sensors, Detection Technologies and Methodologies
A Novel Method for Solar Tracking
Photoelectrochemical Sensing of Hydrazine Based on Palladium Film Modifying N-Silicon Electrode under Visible Irradiation
SVD-TLD Sensing Algorithm for EES-MIMO Radar
A New Turn-Off Fluorescence Chemosensor for Hydrogen Peroxide Based on Carbazole Derivative in Aqueous Solution
Computation of Normal Depth in Horseshoe Shaped Tunnel Using the Rough Model Method
Construction and Verification of Analytical Model for Eddy Current Testing Based on Multi-Layered Conductive Structures
Development of Test Control System for Eddy Current Dynamometer Based on LabVIEW
Research of Ni-Mn-Ga Shape Memory Alloy Based Mechanical Vibration Detection Device
The Calibration Method of Helmholtz Coils for the Permanent Magnet
Displacement Measurement Using a Unique Digital Camera
Novel Method of Digital Holographic Profilometry
Marine Radar Target Detection for USV
A New Classification Method for Stored Grain Insect Infestation Using KIII and SVM Based Electronic Nose
Design of an Online Grain Moisture Detection System
Multi-Objects Ultrasonic Tomography by Immersion Circular Array
The Research of Intelligent Gas Leak Ultrasonic Testing System
A Novel Measurement Method for Muzzle Vibration Responses Based on Image Technology
Based on the Black-Box Method the Design of Simulated Microgravity Greenhouse Device
Chapter 11: Embedded Systems and Modern Electronic, Circuit Technology, Electric, Electromagnetic and Power Engineering Applications
The Study of Intelligent Smart Car Based on msp430
Discussion on Solving down Leading of OPGW under Framework with Insulation
Embedded Control System with SCADA Modbus Network for Monitoring Heat Treating Furnace
A Earth Fault Section Identification Method Based on ANN
Analysis of Magnetic Field of the New Phase-Shifting Transformer
Analysis of Wireless Network Security Based on 4-Way Handshake Protocol
The Design of the Visualized Electric Pre-Warning System in the Working Face Floor
The Design of TTCAN Bus Network Node Based on Embedded Operating System VxWorks
The Output Power of the PV Power Plant Modeling Based on ANFIS
Transient Responses in Continuous Co-Phase Traction Power Supply System
Vehicle Display and Control Terminal Design Based on the MPC5121e and Embedded Linux
A Single-Phase / Three-Phase Transformer Designed for Voltage Detection Unit of 400Hz Converter Excitation Regulator
Discussion on Key Issues of High-Resolution Panel Driver IC Design
Power Load Forecasting Using Improved Grey-Markov Method
Development of the Multi-Purpose Signal Producer which Simulated a Train Passing
Reconfigurable Boundary Scan Tester Using Cellular-Automata Register Technology
Influence of Structure of Electrode Array on Logging. The Resistivity Logging Response through Casing of Structure of Electrode Array
The Influence of Ferrite Materials to NFC Antenna
Research on the Electromagnetic Field Distribution of the Static Horizontal Electric Dipole in Shallow Sea
Transmission Line State Maintenance Expert System Development and Design
The Design of Ceramic Minkowski Fractal Antenna
Chapter 12: Computer Applications and Mathematical Modeling, Intelligent Algorithms and Optimization
A Self-Study Harmony Search Algorithm for Optimization Problems
Application of Tabu-Genetic Algorithm in Reactive Power Optimization
Color Temperature, Hues and Brightness Tuning Method for Images in Digital Cameras
Forecasting Stock Price Based on Back Propagation Neural Network
Opposition-Based Learning Harmony Search Algorithm Solving Unconstrained Optimization Problems
Discussion for Block H-Matrices
New Criteria for Nonsingular H-Matrices
Intrusion Detection for Universal Attack Mode Based on Interval Temporal Logic with Past Construct
A New Genetic-Based Approach for Function Optimization
Student Information Management System Based on Android Platform
Study and Implementation on Computer Aided Innovation System Based on TRIZ
The New Method for Power Quality Indices Estimation
Very Exceptional Group
Study on the Improved Recession Binary Tree Algorithm
The Research into Biorthogonal Six-Variable Wavelet Packets with Two-Scale and Applications in Material Science
Graphical Logic Paradigm and Reasoning Process Research
Development of the Monitoring and Early Warning System for Agricultural Market Information Based on Android Smart Phone
Comprehensive Evaluation for Cast-in-Place Lightweight Gypsum Wall Based on the Theory of Fuzzy Matter-Element
The Study on Shape Drawing Information Identify of Cooperating Neural Network
The Design of the BP Neural Network Character Recognition in Matlab Environment
Research on Dynamic Path Selection Improved Dijkstra Algorithm
Optimal Selection Method of Test Points on Circuit Board Level
Research on the Mechanism of Combined Raceway Superfinishing Technique of Precision Bearing
Chapter 13: Engineering Education and Engineering Management
A Creative Development in Environment Engineering Education with Mind Mapping
Research on the Key to a Successful Construction Special Project-Factor Analysis and Multiple Regressions
Discussion on Construction and Management of Network Laboratory
Practice and Exploration on the Excellent Curriculum of Processing Technology of Paper Box and Carton
Study on the Martial Equipments’ Maintenance Project Management Process
Value Innovation Study in Service Manufacturing Mode
Educational Affordance of eTextbook in Primary Schools: A Case Study
Implementation of a Controlling Scheme Used in a Training System of Cockpit Instruments
Research on Network Teaching Platform Construction Supporting Personalized Learning
Using the Apple iPad to Facilitate Teaching and Learning in the Classroom: A Pilot Study
Research on the Flexible Simulation Model Framework Based on Components
Research on the Tool Management System Based on Web
Multi Strategies-Based Resources Recommendation in Learning Team
Based on the Integration of Power Grid Topology Model of Distribution Network Fault Analysis Applications
Challenges in Hydrogen Fuel Cell Vehicles Commercialization
| Reihe/Serie | Advanced Materials Research |
|---|---|
| Zusatzinfo | Illustrations, unspecified |
| Verlagsort | Zurich |
| Sprache | englisch |
| Maße | 170 x 240 mm |
| Gewicht | 2400 g |
| Themenwelt | Naturwissenschaften ► Chemie ► Technische Chemie |
| Technik | |
| ISBN-10 | 3-03835-207-1 / 3038352071 |
| ISBN-13 | 978-3-03835-207-5 / 9783038352075 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
