Diffusion in Solids and Liquids IX
Trans Tech Publications Ltd (Verlag)
978-3-03835-110-8 (ISBN)
Collection of selected, peer reviewed papers from the 9th International Conference on Diffusion in Solids and Liquids Mass Transfer - Heat Transfer - Microstructure & Properties - Nanodiffusion and Nanostructured Materials (DSL-2013), June 24 – 28, 2013, Madrid, Spain. The goal of the conference was to provide a unique opportunity to exchange information, to present the latest results as well as to review the relevant issues on contemporary diffusion research.
Preface and Committees
Random Walk
Analysis of Laser Weldments for Dual-Phase and Martensitic Steel Sheets for Automotive Applications
Infrared Monitoring of Inner Defects in Glass Laminates
Experimental Study of Micro-Cracks in Laboratory and InSitu Using Infrared Thermography
Sensibility Analysis of the Parameters Affecting Infrared Thermal Images for the Evaluation of Building Pathologies
Comparison of Performance and Emission Parameters in Two Developmental Stages of Boilers
Studies on the Treatment of Wastewaters Containing Cr6+ with Iron Oxide-Silica Composite Materials Prepared by Different Methods
Application of Calcium Carbonate in Resin Transfer Molding Process
Resin Transfer Molding Process: A Numerical Analysis
Methane Diffusion in a Porous Environment
Visualization of Thermal Measuring in 3D Environment
Diffusion Induced Changes in Eutectic Carbides in Inoculated M2 High-Speed Steel at Austenitising
Modelling and Simulation of Resin Transfer Moulding: A Finite Volume Approach Applied to the Mold Filling Stage
Design and Analysis of Concentrated Solar-Energy Assisted Paddle Dryers
A Study on Processing and Chemical Composition of Date Pit Powder for Application in Enhanced Oil Recovery
Water Absorption in Composites Reinforced with Caroá Fiber Fabrics: Modeling and Simulation via ANSYS CFX®
Characterization of Gamma Irradiated PP/LDPE Blend
Experimental Investigation on Flame Propagation Speed of Rice Husk Ash in Fixed Beds
Compressive Aggregates of Two-Dimensional Mono-Disperse to Assess Flaw Dissemination
Interactive Force of Two-Dimensional Compressive Deformation by Discrete Element Method (DEM)
Thermodynamic Simulation of the Oxidation Processes of Ag2Se by NaNO2
Drying of Industrial Ceramic Bricks: An Experimental Investigation in Oven
Estimation of a Nusselt Correlation for the Numerical Prediction of Frost Thickness on a Tube Banks of Triangular Arrangement
Mathematical Modeling of High Energy Ball Milling (HEBM) Process
In Situ Optical Analysis of Structural Changes in Polylactic Acid (PLA) during the Gas Dissolution Process
Thermal Expansion of Cu-Ga-Sn Alloys
Fabrication and Characterization of CeO2-NiO/SiC Membranes for Hydrogen Permeation
Radiation Damaging of 3C-SiC Lattice: Computer Simulation of Brownian Motion of Non-Point Defects
Improving the Diffusion Controlled Cementation of Copper Ions on a Fixed Bed of Zinc Raschig Rings Using Flow Pulses in a Batch Reactor
Effect of Hydrogen on the Mechanical Behavior of API X70 Ageing
Study of Hydrogen Permeation in a Micro-Alloyed Heat Treated Steel
Physical Chemistry of Integrated High-Magnesia Siderites Processing
Concentration Dependence of the Diffusion in the Ni/Cu System
Annealing Effects in Mg-Y-Zn Alloys Prepared by Powder Metallurgy and by Squeeze Casting
Determination of Poroelastic Parameters of Porous Building Materials
Comparative Study of CO2 Absorption in Aqueous Mixtures of Methyldiethanolamine (MDEA) and Methanol, Focusing on the Temperature and Concentration Influence over the Absorption Rate
Evaluation of Rubidium and Potassium Diffusion in Soil by Radiotracer Technique
Irradiation Effect on Ta2O5 Thin Films
Effect of Voltage Parameters on Surface Morphology of Micro Arc Oxidized Cp Titanium
Micro Arc Oxidation of AZ91 Magnesium Alloy – Effect of Organic Compounds in the Electrolyte
Nitrogen Diffusion in Niobium under Low Pressure
Microstructure of Sodium or Potassium Added Mg-Ni Eutectic Alloy
Characterization of LSCO|BCZY|LSCO for Potential Application in IT-SOFC
Effect of Silicon Particle Size on Synthesis and Crystallinity of β-Silicon Carbide Particles
The Synthesis of High-Surface Area Silicon Carbide by Conversion Method Using Carbosilane Polymer
Effect of Hard Coatings on Surface Gray Iron on Fracture Toughness
Effect of Heat Treatment on Microstructure and Mechanical Property of Diamonds Substrates Brazed with Active Filler Metal
Effect of Intermetallics on Pt-Al Surface Coatings Colour
Phase Transformation in Granular Alloys of Cu2S-Ni3S2-Na2S System
Phase Growth in Amorphous Si-Cu and Si-Co Systems: Combination of SNMS, XPS, XRD, and APT Techniques
Elastic Deformation Effects on the Thermo-Hydrodynamic Aspect of Porous Journal Bearings
Determination of Sorption Isotherm Based on the Measured Bottom Contaminant Flux
A Mechano-Chemical Coupling for Hydrogen Diffusion in Metals Based on a Thermodynamic Approach
Self-Diffusion on Pd(111) from the Point of View of the Band Model of Diffusion
The Convergence Rate of Iterative Procedures for Elliptic Problems in Heterogeneous Media
Mass Transfer around a Sphere Buried in a Packed Bed
Rising Damp: Optimization of the Wall Base Ventilation System
| Erscheint lt. Verlag | 2.8.2014 |
|---|---|
| Reihe/Serie | Defect and Diffusion Forum |
| Zusatzinfo | Illustrations, unspecified |
| Verlagsort | Zurich |
| Sprache | englisch |
| Maße | 170 x 240 mm |
| Gewicht | 700 g |
| Themenwelt | Naturwissenschaften ► Physik / Astronomie ► Festkörperphysik |
| Technik ► Maschinenbau | |
| ISBN-10 | 3-03835-110-5 / 3038351105 |
| ISBN-13 | 978-3-03835-110-8 / 9783038351108 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
