Applied Mathematics and Computational Mechanics for Smart Applications (eBook)
XII, 378 Seiten
Springer Singapore (Verlag)
978-981-334-826-4 (ISBN)
This book presents best selected research papers presented at the Thirteenth International Conference on Applied Mathematics and Mechanics in the Aerospace Industry (AMMAI 2020), held from September 6 to September 13, 2020, at the Alushta Health and Educational Center (The Republic of Crimea). The book is dedicated to solving actual problems of applied mechanics using modern computer technology including smart paradigms. Physical and mathematical models, numerical methods, computational algorithms, and software complexes are discussed, which allow to carry out high-precision mathematical modeling in fluid, gas, and plasma mechanics, in general mechanics, deformable solid mechanics, in strength, destruction and safety of structures, etc. Technologies and software systems that provide effective solutions to the problems at various multi-scale levels are considered. Special attention is paid to the training of highly qualified specialists for the aviation and space industry. The book is recommended for specialists in the field of applied mathematics and mechanics, mathematical modeling, information technologies, and developers of modern applied software systems.
Dr. Margarita N. Favorskaya is Professor and Head of Department of Informatics and Computer Techniques at Reshetnev Siberian State University of Science and Technology, Russian Federation. Professor Favorskaya is a member of KES organization since 2010, the IPC member, and Chair of invited sessions of over 30 international conferences. She serves as Reviewer in international journals (Neurocomputing, Knowledge Engineering and Soft Data Paradigms, Pattern Recognition Letters, Engineering Applications of Artificial Intelligence), Associate Editor of Intelligent Decision Technologies Journal, International Journal of Knowledge-Based and Intelligent Engineering Systems, and International Journal of Reasoning-based Intelligent Systems, Honorary Editor of the International Journal of Knowledge Engineering and Soft Data Paradigms, Reviewer, Guest Editor, and Book Editor (Springer). She is the author/co-author of 200 publications and 20 educational manuals in computer science/engineering. She co-authored/co-edited seven books for Springer recently. She supervised nine Ph.D. candidates and is presently supervising four Ph.D. students. Her main research interests are digital image and videos processing, remote sensing, pattern recognition, fractal image processing, artificial intelligence, smart systems design, and information technologies.
Dr. Lakhmi C. Jain is with the University of Technology Sydney, Australia, and Liverpool Hope University, UK. He is Fellow of the Institution of Engineers Australia. Professor Jain founded the KES International for providing a professional community the opportunities for publications, knowledge exchange, cooperation, and teaming. Involving around 5,000 researchers drawn from universities and companies worldwide, KES facilitates international cooperation and generates synergy in teaching and research. KES regularly provides networking opportunities for professional community through one of the largest conferences of its kind in the area of KES. www.kesinternational.org
Dr. Ilia S. Nikitin is Professor and Director ICAD RAS, Professor at Moscow aviation institute (MAI), a member of the Russian National Committee on Theoretical and Applied Mechanics, expert RAS, expert RSF, expert Minobrnauki RF. He graduated from Moscow Institute of Physics and Technology. His scientific interests are mathematical modeling, numerical methods in continuum mechanics, moving adaptive meshes, dynamics of elastoplastic media, fatigue fracture, durability of operation, and high-frequency loading. The main scientific results are the numerical methods for solving non-stationary problems of continuum mechanics on moving and adaptive grids, methods for calculating the stress state of elements of aircraft structures and assessing the durability for various fatigue failure modes, refined models of layered and block media with different sliding conditions at the contact boundaries, the problems of propagation, transformation and reflection of waves in such media, and models of sintering powder materials under thermomechanical and pulsed high-energy effects.
Dr. Dmitry L. Reviznikov is Professor of the Department of Numerical Mathematics and Programming at Moscow Aviation Institute (National Research University), Russian Federation. Professor Dmitry L Reviznikov is a member of the Russian National Committee on Heat and Mass Transfer and a member of the Scientific Council of International Centre for Heat and Mass Transfer (ICHMT). He is Reviewer in international journals (International Journal of Heat and Mass Transfer, Computational Thermal Sciences, International Journal of Fluid Mechanics Research). He supervised eight Ph.D. candidates and is presently supervising three Ph.D. students. Scientific interests include mathematical modeling, computational physics, heat and mass transfer, multiphase flows, nonlinear dynamics, and data analysis. He is the author of more than 100 scientific papers in Russian and international journals and 4 monographs. Scientific results include fundamental results in the fields of modeling of conjugated heat and mass transfer, supersonic heterogeneous flows, thermal erosion destruction of heat-shielding coatings, anomalous diffusion, numerical methods for fractional differential equations, nonlinear wave dynamics, and interval analysis.This book presents best selected research papers presented at the Thirteenth International Conference on Applied Mathematics and Mechanics in the Aerospace Industry (AMMAI 2020), held from September 6 to September 13, 2020, at the Alushta Health and Educational Center (The Republic of Crimea). The book is dedicated to solving actual problems of applied mechanics using modern computer technology including smart paradigms. Physical and mathematical models, numerical methods, computational algorithms, and software complexes are discussed, which allow to carry out high-precision mathematical modeling in fluid, gas, and plasma mechanics, in general mechanics, deformable solid mechanics, in strength, destruction and safety of structures, etc. Technologies and software systems that provide effective solutions to the problems at various multi-scale levels are considered. Special attention is paid to the training of highly qualified specialists for the aviation and space industry. The book is recommended for specialists in the field of applied mathematics and mechanics, mathematical modeling, information technologies, and developers of modern applied software systems.
| Erscheint lt. Verlag | 14.3.2021 |
|---|---|
| Reihe/Serie | Smart Innovation, Systems and Technologies | Smart Innovation, Systems and Technologies |
| Zusatzinfo | XII, 378 p. 178 illus., 105 illus. in color. |
| Sprache | englisch |
| Themenwelt | Mathematik / Informatik ► Informatik ► Theorie / Studium |
| Technik ► Bauwesen | |
| Technik ► Fahrzeugbau / Schiffbau | |
| Technik ► Luft- / Raumfahrttechnik | |
| Technik ► Maschinenbau | |
| Schlagworte | Artificial Intelligence • Computational Mechanics • Contact Interaction • Continuum Mechanics • ICCBI 2020 • machine learning • Multiphase Mechanics • Numerical Methods • Parallel Computing • Smart Systems • solid mechanics • Tribology |
| ISBN-10 | 981-334-826-7 / 9813348267 |
| ISBN-13 | 978-981-334-826-4 / 9789813348264 |
| Haben Sie eine Frage zum Produkt? |
PDF (Wasserzeichen)Größe: 10,1 MB
DRM: Digitales Wasserzeichen
Dieses eBook enthält ein digitales Wasserzeichen und ist damit für Sie personalisiert. Bei einer missbräuchlichen Weitergabe des eBooks an Dritte ist eine Rückverfolgung an die Quelle möglich.
Dateiformat: PDF (Portable Document Format)
Mit einem festen Seitenlayout eignet sich die PDF besonders für Fachbücher mit Spalten, Tabellen und Abbildungen. Eine PDF kann auf fast allen Geräten angezeigt werden, ist aber für kleine Displays (Smartphone, eReader) nur eingeschränkt geeignet.
Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen dafür einen PDF-Viewer - z.B. den Adobe Reader oder Adobe Digital Editions.
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen dafür einen PDF-Viewer - z.B. die kostenlose Adobe Digital Editions-App.
Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.
aus dem Bereich
