Nicht aus der Schweiz? Besuchen Sie lehmanns.de
Embedded Systems Design using the MSP430FR2355 LaunchPad™ - Brock J. LaMeres

Embedded Systems Design using the MSP430FR2355 LaunchPad™

Buch | Hardcover
XIV, 480 Seiten
2020 | 1st ed. 2020
Springer International Publishing (Verlag)
978-3-030-40573-1 (ISBN)
CHF 104,80 inkl. MwSt
zur Neuauflage
  • Titel erscheint in neuer Auflage
  • Artikel merken
Zu diesem Artikel existiert eine Nachauflage
This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach.

LEARN BY EXAMPLE C - This book is designed to teach the material the way it is learned, through example.
lt;p>

This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach.

LEARN BY EXAMPLE - This book is designed to teach the material the way it is learned, through example. Every concept is supported by numerous programming examples that provide the reader with a step-by-step explanation for how and why the computer is doing what it is doing.

LEARN BY DOING - This book targets the Texas Instruments MSP430 microcontroller. This platform is a widely popular, low-cost embedded system that is used to illustrate each concept in the book. The book is designed for a reader that is at their computer with an MSP430FR2355 LaunchPadTM Development Kit plugged in so that each example can be coded and run as they learn.

LEARN BOTH ASSEMBLY AND C - The book teaches the basic operation of an embedded computer using assembly language so that the computer operation can be explored at a low-level. Once more complicated systems are introduced (i.e., timers, analog-to-digital converters, and serial interfaces), the book moves into the C programming language. Moving to C allows the learner to abstract the operation of the lower-level hardware and focus on understanding how to "make things work".

BASED ON SOUND PEDAGOGY - This book is designed with learning outcomes and assessment at its core. Each section addresses a specific learning outcome that the student should be able to "do" after its completion. The concept checks and exercise problems provide a rich set of assessment tools to measure student performance on each outcome.

Brock LaMeres is a Professor in the Department of Electrical and Computer Engineering at Montana State University. He received his Ph.D. in electrical engineering from the University of Colorado, Boulder in December of 2005, his MSEE from the University of Colorado, Colorado Springs in May of 2001, and his BSEE from Montana State University, Bozeman in December of 1998. LaMeres teaches and conducts research in the area of digital systems with particular emphasis on embedded computing. Dr. LaMeres has published over 100 manuscripts and 6 textbooks in the area of digital systems. LaMeres has also been granted 13 US patents in the area of digital signal propagation. LaMeres is a Senior Member of IEEE and a Registered Professional Engineer in the States of Montana and Colorado. In 2018, Dr. LaMeres was awarded the Distinguished Educator Award in electrical and computer engineering from the American Society of Engineering Education. Prior to coming to MSU, Dr. LaMeres worked as an R&D engineer for Agilent Technologies in Colorado Springs, CO from 1999 to 2006. LaMeres was a hardware design engineer in the Logic Analysis R&D lab. He designed acquisition hardware for the 16910/11/12 and 16950 Logic Analyzer systems in addition to developing a variety of probing solutions.

Introduction.- Digital Logic Basics.- Computer Systems.- The MSP430.- Programming the MSP430 in Assembly.- Data Movement.- ALU Instructions.- Program Control Instructions.- Digital Input/Output.- The Stack and Subroutines.- Introduction to Interrupts.- Introduction to Timers.- Switching to the C Language.- Digital I/O in C.- Interrupts in C.- Timers in C.- Serial Communication Interfaces in C.- Analog to Digital Converters in C.- Other Cool Stuff to do with the MSP430.

Erscheinungsdatum
Zusatzinfo XIV, 480 p. 442 illus., 433 illus. in color.
Verlagsort Cham
Sprache englisch
Maße 178 x 254 mm
Gewicht 1114 g
Themenwelt Mathematik / Informatik Informatik Theorie / Studium
Technik Elektrotechnik / Energietechnik
Schlagworte Cyber-physical system design textbook • Embedded Hardware • Embedded Software • Embedded Systems Textbook • Hardware/Software Codesign Textbook • Real-Time Systems Textbook
ISBN-10 3-030-40573-7 / 3030405737
ISBN-13 978-3-030-40573-1 / 9783030405731
Zustand Neuware
Haben Sie eine Frage zum Produkt?
Mehr entdecken
aus dem Bereich
was jeder über Informatik wissen sollte

von Timm Eichstädt; Stefan Spieker

Buch | Softcover (2024)
Springer Vieweg (Verlag)
CHF 53,15
Eine Einführung in die Systemtheorie

von Margot Berghaus

Buch | Softcover (2022)
UTB (Verlag)
CHF 34,95
Grundlagen – Anwendungen – Perspektiven

von Matthias Homeister

Buch | Softcover (2022)
Springer Vieweg (Verlag)
CHF 48,95