Mechanical Design Modeling Using Pro/Engineer
2001
|
International student edition
McGraw-Hill Professional (Verlag)
978-0-07-112185-9 (ISBN)
McGraw-Hill Professional (Verlag)
978-0-07-112185-9 (ISBN)
- Titel ist leider vergriffen;
keine Neuauflage - Artikel merken
Introduces a different way of teaching CAD and PRO/E methods, by using actual mechanical design projects. This book teaches instructions & commands, illustrations, and explanations by way of doing realistic mechanical projects. It covers the basic procedures of PRO/E.
The use of powerful parametric-based CAD systems in Engineering is a major trend and one that this text addresses directly. There has been an increased emphasis on the use of CAD tools, especially ProEngineer (PRO/E), in engineering design. CAD programs, including PRO/E, are used to create, test, modify, and eventually deliver project designs for manufacturing.This new workbook/text introduces an innovative way of teaching CAD and PRO/E methods, by using actual mechanical design projects. The approach teaches instructions & commands, illustrations, and explanations by way of doing realistic mechanical projects. MECHANICAL DESIGN MODELING USING PROENGINEER by Condoor is the most up-to-date text on PRO/E, covering the latest release of the product, PROENGINEER 2001. Condoor's unique approach accomodates beginners, intermediate students, and those with some PRO/E capability. Each page is laid out carefully so that students can match design steps with PRO/E commands and procedures. This approach encourages the reader to get acquainted with the actual work of designing components and assembling a final product of mechanical system.The text can be used by students in Freshmen Graphics, by those taking a later CAD or CAD/CAM course, and by those taking a Senior Design course where practical CAD usage is needed.It covers the basic procedures of PRO/E and more with a unique “how to” approach.
The use of powerful parametric-based CAD systems in Engineering is a major trend and one that this text addresses directly. There has been an increased emphasis on the use of CAD tools, especially ProEngineer (PRO/E), in engineering design. CAD programs, including PRO/E, are used to create, test, modify, and eventually deliver project designs for manufacturing.This new workbook/text introduces an innovative way of teaching CAD and PRO/E methods, by using actual mechanical design projects. The approach teaches instructions & commands, illustrations, and explanations by way of doing realistic mechanical projects. MECHANICAL DESIGN MODELING USING PROENGINEER by Condoor is the most up-to-date text on PRO/E, covering the latest release of the product, PROENGINEER 2001. Condoor's unique approach accomodates beginners, intermediate students, and those with some PRO/E capability. Each page is laid out carefully so that students can match design steps with PRO/E commands and procedures. This approach encourages the reader to get acquainted with the actual work of designing components and assembling a final product of mechanical system.The text can be used by students in Freshmen Graphics, by those taking a later CAD or CAD/CAM course, and by those taking a Senior Design course where practical CAD usage is needed.It covers the basic procedures of PRO/E and more with a unique “how to” approach.
Sridhar Condoor (St. Louis, MO) teaches in the Dept. of Aerospace and Mechanical Engineering Parks College of St. Louis University.
1 Introduction 2 Bearings 3 Bearings 4 Bushing 5 Retaining Ring 6 Shaft 7 Nuts and Bolts 8 Bolt Heads 9 Washington Monument and Wing 10 Springs 11 Axial Cam 12 Radial Plate Cam 13 Grooved Cam 14 Gateway Arch 15 Spur and Helical Gears 16 Shaft Drawing 17 Housing 18 Cam Follower Assembly 19 Electrical Fuse Assembly 20 Tricks of the Trade
| Erscheint lt. Verlag | 16.10.2001 |
|---|---|
| Zusatzinfo | illustrations |
| Sprache | englisch |
| Maße | 213 x 274 mm |
| Gewicht | 522 g |
| Themenwelt | Informatik ► Office Programme ► Outlook |
| Informatik ► Weitere Themen ► CAD-Programme | |
| Technik ► Maschinenbau | |
| ISBN-10 | 0-07-112185-4 / 0071121854 |
| ISBN-13 | 978-0-07-112185-9 / 9780071121859 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
Mehr entdecken
aus dem Bereich
aus dem Bereich
Buch | Softcover (2022)
Markt + Technik Verlag
CHF 20,90
