Advanced Materials Modelling for Structures
Springer Berlin (Verlag)
978-3-642-35166-2 (ISBN)
This volume presents the major outcome of the IUTAM symposium on "Advanced Materials Modeling for Structures". It discusses advances in high temperature materials research, and also to provides a discussion the new horizon of this fundamental field of applied mechanics. The topics cover a large domain of research but place a particular emphasis on multiscale approaches at several length scales applied to non linear and heterogeneous materials.
Discussions of new approaches are emphasised from various related disciplines, including metal physics, micromechanics, mathematical and computational mechanics.
Prof. Dr.-Ing. habil. Holm Altenbach lehrt Technische Mechanik an der Otto-von-Guericke-Universität Magdeburg. Seine Forschungsschwerpunkte liegen auf verschiedenen Gebieten der Kontinuumsmechanik (Plattentheorie, Kriechschädigungsmechanik, Mechanik der Komposite).
Micromechanical Modelling of Void Healing.- Surface Viscoelasticity and Effective Properties of Materials and Structures.- High-temperature inelastic behavior of the austenitic steel AISI type 316.- Finite Element Modelling of the Thermo-Mechanical Behaviour of a 9Cr Martensitic Steel.- Enhanced Global Digital Image Correlation for accurate measurement of microbeam bending.- An Investigation of the Mechanical Properties of Open Cell Aluminium Foam Struts: Microtensile Testing and Modelling.- Multiscale Optimization of Joints of Dissimilar Materials in Nature and Lessons for Engineering Applications.- Some consequences of stress range dependent constitutive models in creep.- Micro-mechanical numerical studies on the stress state dependence of ductile damage.- Characterization of load sensitive fatigue crack initiation in Ti-alloys using crystal plasticity based FE simulations.- Creep Crack Growth Modelling in 316H Stainless Steel.- On the non saturation of cyclic plasticity law: a power law for kinematic hardening.- Micromechanical studies of deformation, stress and crack nucleation in polycrystal materials.- Modeling of coupled dissipative phenomena in engineering materials.- Damage Deactivation of Engineering Materials and Structures.- Effect of orientation and overaging on the creep and creep crack growth properties of 2xxx aluminium alloy forgings.- Dislocation-Induced Internal Stresses.- A strain rate sensitive formulation to account for the effect of Gamma' rafting on the high temperature mechanical properties of Ni-based single crystal superalloys.
| Erscheint lt. Verlag | 26.2.2013 |
|---|---|
| Reihe/Serie | Advanced Structured Materials |
| Zusatzinfo | XXII, 361 p. 239 illus., 60 illus. in color. |
| Verlagsort | Berlin |
| Sprache | englisch |
| Maße | 155 x 235 mm |
| Gewicht | 702 g |
| Themenwelt | Mathematik / Informatik ► Mathematik ► Analysis |
| Mathematik / Informatik ► Mathematik ► Angewandte Mathematik | |
| Technik ► Maschinenbau | |
| Schlagworte | constitutive formulations • continuum damage analysis • Continuum damage mechanics • Creep Mechanics • high temperature structures • IUTAM Advanced Materials Modeling for Structures • Materialwissenschaft • multi-materials • Ratcheting • thermo-mechanical loads |
| ISBN-10 | 3-642-35166-2 / 3642351662 |
| ISBN-13 | 978-3-642-35166-2 / 9783642351662 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
