Advances in Materials Science and Engineering
Springer Verlag, Singapore
978-981-15-4061-5 (ISBN)
Dr. Chander Prakash is Associate Professor in the School of Mechanical Engineering, Lovely Professional University, Jalandhar, India. He has received Ph.D in mechanical engineering from Panjab University, Chandigarh, India. His area of research is biomaterials, rapid prototyping & 3-D printing, advanced manufacturing, modeling, simulation, and optimization. He has more than 11 years of teaching experience and 6 years’ of research experience. He has contributed extensively to the world in the titanium and magnesium based implant literature with publications appearing in Surface and Coating Technology, Materials and Manufacturing Processes, Journal of Materials Engineering and Performance, Journal of Mechanical Science and Technology, Nanoscience and Nanotechnology Letters, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. He has authored 60 research papers and 10 book chapters. He is also editor of 3 books: "Current Trends inBio-manufacturing", Springer Series in Advanced Manufacturing, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., Dec. 2018; “3D Printing in Biomedical Engineering”, Book series Materials Horizons: From Nature to Nanomaterials, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., August 2019, and "Biomaterials in Orthopaedics and Bone Regeneration - Design and Synthesis", Book series Materials Horizons: From Nature to Nanomaterials, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., March 2019. He is also guest editor of 3 journals: special issue of “Functional Materials and Advanced Manufacturing”, Facta Universitatis, Series: Mechanical Engineering (Scopus Index), Materials Science Forum (Scopus Index), and special issue on “Metrology in Materials and Advanced Manufacturing”, Measurement and Control (SCI indexed). Dr. Sunpreet Singh is researcher in NUS Nanoscience & Nanotechnology Initiative (NUSNNI). He has received Ph.D in Mechanical Engineering from Guru Nanak Dev Engineering College, Ludhiana, India. His area of research is additive manufacturing and application of 3D printing for development of new biomaterials for clinical applications. He has contributed extensively in additive manufacturing literature with publications appearing in Journal of Manufacturing Processes, Composite Part:B, Rapid Prototyping Journal, Journal of Mechanical Science and Technology, Measurement, International Journal of Advance Manufacturing Technology, and Journal of Cleaner Production. He has authored 10 book chapters and monographs. He is working in joint collaboration with Prof. Seeram Ramakrishna, NUS Nanoscience & Nanotechnology Initiative and Prof. Rupinder Singh, manufacturing research lab, GNDEC, Ludhiana. He is also editor of 3 books: "Current Trends in Bio-manufacturing", Springer Series in Advanced Manufacturing, Springer International PublishingAG, Gewerbestrasse 11, 6330 Cham, Switzerland., Dec. 2018; “3D Printing in Biomedical Engineering”, Book series Materials Horizons: From Nature to Nanomaterials, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., August 2019, and "Biomaterials in Orthopaedics and Bone Regeneration - Design and Synthesis", Book series Materials Horizons: From Nature to Nanomaterials, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., March 2019. He is also guest editor of 3 journals: special issue of “Functional Materials and Advanced Manufacturing”, Facta Universitatis, Series: Mechanical Engineering (Scopus Index), Materials Science Forum (Scopus Index), and special issue on “Metrology in Materials and Advanced Manufacturing”, Measurement and Control (SCI indexed). Prof. Grzegorz Krolczyk is Professor in the Opole University of Technology. He is an originator and a Project Manager of OUTech’s new Surface Integrity Laboratory. In his career he has held positions such as: head of unit design and technology, product engineer, production manager, product development engineer and production director. He is the co-author and project leader of a project Innovative, energy-efficient diaphragm flow device of a new generation. He is connected with the mechanical industry, where he managed teams from a few to over a hundred people. His industrial engineering experience was gained while working in an European holding company involved in machining of construction materials and plastic injection, where he was responsible for contacts with companies on technical issues such as quotation and implementation of new products. In professional career he was responsible from the implementation to production of products such as peristaltic pumps, ecological sprayers to spray organic pesticides and many pressure equipment operating e.g. in chemical plants. As a production manager, he was responsible from implementation to production and launching the assembly line for innovative sprayer ultra-low volume spraying system. He is author and co-author of over 80 scientific publications and nearly 20 studies and implementation of industry. The main directions of scientific activity are surface metrology, optimization of geometrical and physical parameters of surface integrity, optimization of production and cutting tool wear analysis in dry machining process of difficult-to-cut materials. He is also editor of various Journals and Books. Prof. B. S. Pabla is Dean Extension Services & Consultancy and Professor in Mechanical Engineering, National Institute of Technical Teachers Training & Research, Chandigarh, India. His has received Ph.D in mechanical engineering from Panjab University, Chandigarh, India. His area of research is non-traditional machining, CAD/CAM, biomaterials and bio-manufacturing. He has more than 37 years of teaching and research experience. He has contributed extensively to the world in materials and manufacturing processes literature with publications appearing in Surface and Coating Technology, Materials and Manufacturing Processes, Journal of Materials Engineering and Performance, Journal of Mechanical Science and Technology, Nanoscience and Nanotechnology Letters, Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture. He has granted 2 patents, published 5 books, and completed more than 10 research projects from various funding agencies.
On study A brief study on the heterogeneity of the P91 welded joint.- Recent Innovation on Synthesis methods of Graphene based Composites.- Evaluation of mechanical properties of carbon fiber reinforced multiwall carbon nanotubes-based nanocomposites.- Structural and modal analysis of peek-cf composite for aircraft wing.- Mechanical characterization of 60Pb40Sn reinforced Al6061 self-healing composite.- A Brief Overview of Crystal Plasticity Approach for Computational Materials Modeling.- Evaluation of creep and compressive behavior of MWCNTs reinforced Polyurethane composites.- Influence of particle morphologies of mesoporous hydroxyapatite nanopowders on controlled delivery of vancomycin drug.- Critical review on corrosive properties of metals and polymers in oil and gas pipelines.- Synthesis and Characterization of Aluminum Composite Reinforced by Multiwall Carbon Nanotubes.- Effect of TiC reinforcement in the Copper tool on roundness during EDM process.- Mechanical and microstructural characterization of Magnesium/Multi-walled Carbon Nanotubes composites fabricated via Friction Stir Processing.- Influence of Surface Treatment and Moulding Temperature on Mechanical properties of Jute/PLA based Green Composites.- Effect of Nanoclay in unidirectional carbon-epoxy laminated composites.- Microstructural evolution and mechanical properties of aluminum alloy 7075-T651 processed by friction stir processing.- Pre- and Post-Treatment Characterization of Petrol Contaminated Soil.- Microstructural and mechanical properties of AA6061 aluminium alloy reinforced with nano-SiC particles using FSP.- Segregation and recycling of plastic solid waste: A review.- Vibration response of metal-ceramic based functionally graded plate using navier solution.- Influence of the microstructural and mechanical properties of reinforced Graphene in Magnesium matrix fabricated by Friction Stir Processing.- Strength properties of m40 concrete with rice husk ash as partial replacement of cement.- Influence of Graphene on Mechanical behavior of EVA composite at low strain rate loading.- Development and Electrical Properties of Titanium Dioxide Based Polymer Nano Composite Structures.- Investigation of structural and electronic properties of bax(x = s, se, and te): a dft study.
| Erscheinungsdatum | 28.06.2021 |
|---|---|
| Reihe/Serie | Lecture Notes in Mechanical Engineering |
| Zusatzinfo | 137 Illustrations, color; 36 Illustrations, black and white; XIII, 289 p. 173 illus., 137 illus. in color. |
| Verlagsort | Singapore |
| Sprache | englisch |
| Maße | 155 x 235 mm |
| Themenwelt | Naturwissenschaften ► Chemie ► Technische Chemie |
| Technik ► Maschinenbau | |
| ISBN-10 | 981-15-4061-6 / 9811540616 |
| ISBN-13 | 978-981-15-4061-5 / 9789811540615 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
